Maytag MBF1953DEM Use & Care Manual

Page of 72
7
Remove and Replace Handles
Refrigerator Door(s)
To remove handles, use a
 ³⁄₃₂" hex key to loosen the two 
setscrews located on the side of each handle. Pull the handle 
straight out from the door or drawer. Make sure you keep the 
screws for reattaching the handles. See Handle graphics 1 
or 2.
To replace handles, reverse the directions. 
Freezer Drawer  
To remove handles, use a
 ³⁄₃₂" hex key to loosen the two 
setscrews located under each handle. Pull the handle straight 
out from the door or drawer. Make sure you keep the screws 
for reattaching the handles. See Graphic 4.
To replace handles, reverse the directions.
Freezer Door
To remove handle, use a flat-blade screwdriver to remove the 
two screws fastening the handle to the freezer door. See 
Graphic 4.
To replace handle, reverse the directions.  
Remove Doors and Hinges
Standard Door 
Freezer drawer models
1. Unplug refrigerator or disconnect power. 
2. Keep the refrigerator door closed until you are ready to lift it 
free from the cabinet.
NOTE: Provide additional support for the door while the 
hinges are being moved. Do not depend on the door gasket 
magnets to hold the door in place while you are working.
3. Remove the parts for the top hinge as shown in Top Hinge 
graphic. Lift the refrigerator door free from the cabinet.
4. Remove the parts for the bottom hinge as shown in Bottom 
Hinge graphic.
Freezer door models
1. Unplug refrigerator or disconnect power. 
2. Keep the freezer door closed until you are ready to lift it free 
from the cabinet.
NOTE: Provide additional support for the door while the 
hinges are being moved. Do not depend on the door gasket 
magnets to hold the door in place while you are working.
3. Remove the parts for the top hinge as shown in Top Hinge 
graphic. Lift the refrigerator door free from the cabinet.
4. Remove the center hinge pin and remove the hinge screws as 
shown in the Center Hinge graphic. Lift the freezer door free 
from the cabinet.
5. Remove the base grille by grasping the grille firmly with both 
hands and pulling it toward you. 
6. Remove the parts for the bottom hinge as shown in Bottom 
Hinge graphic. 
French Doors
1. Unplug refrigerator or disconnect power.
2. Keep the refrigerator doors closed until you are ready to lift 
them free from the cabinet.
NOTE: Provide additional support for the refrigerator door 
while the hinges are being removed. Do not depend on the 
door gasket magnets to hold the door in place while you are 
working.
3. Starting with the right-hand side door, remove the parts for the 
top hinge as shown in Top Hinge graphic. Lift the refrigerator 
door from the bottom hinge pin.
4. Remove the hinge pin cover from the bottom hinge pin and 
keep it for later use. See Bottom Hinge graphic.
5. Before removing the left-hand side door, disconnect the wiring 
plug located on top of the top hinge by wedging a flat-blade 
screwdriver or your fingernail between the two sections. See 
Wiring Plug graphic.
NOTE: The green, ground wire remains attached to the hinge.
6. Remove the parts for the left-hand side door top hinge as 
shown in the Top Hinge graphic. Lift the door from the bottom 
hinge pin.
NOTE: Remove the hinge pin cover from the bottom hinge pin 
and keep it for later use. See Bottom Hinge graphic.
Reverse Door - Standard Door (optional)
IMPORTANT: If you want to reverse your door so it opens from 
the opposite side, follow these steps. If you are not reversing the 
door, see “Replace Door(s) and Hinges.” 
Cabinet
1. Remove hinge screws from handle side and move them to 
opposite side. See Graphic 1.
Refrigerator door
1. Remove the refrigerator handle assembly as shown in 
Graphic 2. Keep all parts together.
2. Remove door handle seal screw front. Move to opposite side 
of refrigerator door as shown in Graphic 5. 
3. Remove the door stop. Move it to the opposite side of the 
refrigerator door as shown in Graphic 3. 
4. Attach refrigerator handle on opposite side of the refrigerator 
door with the two screws as shown in Graphic 2. Replace 
handle trim as shown.
5. Tighten all screws. Set aside the door until hinges and freezer 
compartment drawer are in place.
 Hex Head Top Hinge Screw
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
Door Stop Screw
Cabinet Hinge Hole Plug
Flat-Head Handle Screw
Door Handle Seal Screw Front