Allied Telesis AT-PC232/POE AT-PC232/POE-30 Data Sheet
Product codes
AT-PC232/POE-30
Status Indicators
System LEDs:
Power
Indicates power is applied to the
converter
converter
Mode status
Indicates operating mode,
MissingLink, Smart MissingLink and
Link Test
MissingLink, Smart MissingLink and
Link Test
Per Fiber Port:
Link (LNK)
Indicates valid/invalid link
Activity (ACT)
Indicated data is being received or
transmitted
transmitted
Per Copper Port:
Link (LNK)
Indicates valid/invalid link
Activity (ACT)
Indicated data is being received or
transmitted
transmitted
Speed (100)
Indicates whether the port is
connected at 100Mbps or 10Mbps
connected at 100Mbps or 10Mbps
Auto-negotiation Indicates port is set for auto-
(Auto NEG)
(Auto NEG)
negotiation
PoE Power (15W) Indicates that the remote device is a
Class 0 or Class 3 PD device
PoE Power (7W) Indicates that the remote device is a
Class 2 PD device
PoE Power (4W) Indicates that the remote device is a
Class 1 PD device
Operational Characterisitcs
(Each port can be configured via the following switches)
Per Fiber Port:
Duplex
Selects either full or half-duplex
operation
operation
Per Copper Port:
Auto
Selects auto-negotiation mode or
manual setting
manual setting
Duplex
Forces port to full or half-duplex
operation
(auto setting = manual only)
operation
(auto setting = manual only)
100
Forces port to 10 or 100Mbps
operation
(auto setting = manual only)
operation
(auto setting = manual only)
MAC address table 1k addresses
Forwarding/
Forwarding/
148,880pps for 100Mbps
filtering rate
14,880pps for 10Mbps
Latency 14.3Ìsec
(64 byte packet, 100Mbps full-duplex)
Maximum packet 1916 bytes
size
Optical Characterisitcs
Wavelength
1310nm
Fiber cable
50/125um or 62.5/125um
multi-mode fiber
multi-mode fiber
Power Characteristics
Input voltage (auto-ranging)
Internal power supply 100-120V AC/60Hz,
Internal power supply 100-120V AC/60Hz,
220-240V AC/50Hz
Power consumption 25W max
Power over Ethernet
Opertating mode
IEEE 802.3af Mode A
Maximum power
15.4W
Environmental Specifications
Operating temp.
0°C to 40°C
Storage temp.
-25°C to 70°C
Relative humidity
5% to 95% non-condensing
Operating altitude
0 to 10,000 feet
Physical Characteristics
Dimensions
15.5cm x 13.1cm x 4cm
(W x D x H)
(6.1" x 5.16" x 1.58")
Weight
0.748kg
(1.65lb)
(1.65lb)
Electrical/Mechanical Approvals
FCC Class B, EN55022 Class B, C-Tick, CE compliant
Ordering Information
AT-PC232/POE-xx
2 port Fast Ethernet PoE switch, 10/100TX to 100FX (SC), 2km
Where xx =
10 AC power supply, US power cord
20 AC power supply, European power cord
30 AC power supply, UK power cord
40 AC power supply, Australian power cord
20 AC power supply, European power cord
30 AC power supply, UK power cord
40 AC power supply, Australian power cord
AT-PC232/POE
| 2 Port Fast Ethernet Speed/Media Converting Switch with PoE
USA Headquarters
|
19800 North Creek Parkway
|
Suite 100
|
Bothell
|
WA 98011
|
USA
|
T: +1 800 424 4284
|
F: +1 425 481 3895
European Headquarters
|
Via Motta 24
|
6830 Chiasso
|
Switzerland
|
T: +41 91 69769.00
|
F: +41 91 69769.11
Asia-Pacific Headquarters
|
11 Tai Seng Link
|
Singapore
|
534182
|
T: +65 6383 3832
|
F: +65 6383 3830
www.alliedtelesis.com
© 2009 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-000284 Rev.B
Output Power (dBm)
Min.
Typical
Max.
-22.5
-20.3
-14
Receive Power (dBm)
Min.
Typical
Max.
-31.8
-34.5
-14