Sony BDV-N7200W Owner's Manual

62

US

BDV-N9200W/BDV-N7200W/BDV-N5200W

4-485-799-12(1)

D:\NORM'S JOB\SONY HA\SO130077\BDV-N9200_7200_5200_E3200 
(PMRF 01)\4485799121_US (U2)\100ADD.fm

masterpage: Left

[Resetting]

x

You can reset the system settings to the 
factory default by selecting the group of 
settings. All the settings within the 
group will be reset.

x

You can erase your personal 
information stored in the system.

If you dispose, transfer or resell this 
system, please delete all Personal 
Information for security purposes. Please 
take the appropriate measures such as 
logging out after using a network service.

Precautions

• Should any solid object or liquid fall 

into the cabinet, unplug the system 
and have it checked by qualified 
personnel before operating it any 
further.

• Do not touch the AC power cord 

(mains lead) with wet hands. Doing so 
may cause an electric shock.

If you are not going to use the system 
for a long time, be sure to disconnect 
the system from the wall outlet. To 
disconnect the AC power cord (mains 
lead), grasp the plug itself; never pull 
the cord.

• Place the system in a location with 

adequate ventilation to prevent heat 
build-up in the system.

• Although the system heats up during 

operation, this is not a malfunction. If 
you continuously use this system at a 
large volume, the cabinet temperature 
of the top, side and bottom rises 
considerably. To avoid burning 
yourself, do not touch the cabinet.

• Do not place the system on a soft 

surface (rugs, blankets, etc.) that 
might block the ventilation holes.

• Do not install the system near heat 

sources such as radiators, air ducts, or 
in a place subject to direct sunlight, 
excessive dust, mechanical vibration, 
or shock.

• Do not install the system in an inclined 

position. It is designed to be operated 
in a horizontal position only.

Additional Information