Yamaha YSP1400BL Owner's Manual

Settings

You can use the TV remote control to turn on/off the unit or adjust its volume by having
the unit learn the TV remote control signals.

Turn off the TV and unit.

Hold down the LEARN key on the supplied remote control for more
than 3 seconds to set the unit to the learning mode.

When the unit is in the learning mode, the indicators on the front panel flash as
shown below.

NOTE

• Steps 3 to 6 require only the TV remote control and the keys on the front panel of the unit. The

remote control of the unit is not necessary.

Make the unit learn the mute operation.

3-1

Press INPUT on the front panel of the unit.

3-2

While pointing your TV remote control at the remote control sensor, hold
down the mute key for more than 1 second twice or three times.

Make the unit learn the volume (–) operation.

4-1

Press VOLUME (–) on the front panel of the unit.

4-2

While pointing your TV remote control at the remote control sensor, hold
down the volume (–) key for more than 1 second twice or three times.

Controlling the unit with TV remote control (TV
remote control learning function)

NOTE

• This function is available only when your TV remote control uses infrared signals.
• Depending on the installation conditions or settings of the unit, both the unit and TV will receive the TV

remote control signals and operate simultaneously.

Continued

➜

Result

Bleep/buzzer

Indicators

Successfully
learned

Once

Learning has
failed
* Repeat from

Step 3-1.

Twice

Result

Bleep/buzzer

Indicators

Successfully
learned

Once

Learning has
failed
* Repeat from

Step 4-1.

Twice

Approx. 30 cm (1 ft)

TV remote control

Hold down

(more than 1 second)

Release

(more than 1 second)

Hold down

(more than 1 second)

Release

(more than 1 second)

Lights up

Flash

Lights up

Flash