Aluratek ABLK04F Quick Setup Guide

Portable Slim LED Backlit 

Bluetooth Keyboard 

The battery is not fully charged and it is highly recommended that you charge ABLK04F before you begin using it.

Note: Using ABLK04F “out of the box” will not harm the device. You will experience reduced battery life as the unit will not be fully charged.

Connect the micro USB end of the USB cable provided to the keyboard and the other end of the USB cable to a 
computer. Please charge the battery for a minimum of 3 hours. The red LED will be on while charging. When 
charging is complete, the red LED will turn off.

1. Make sure ABLK04F is turned ON by sliding the power switch towards 

    the connect button. The blue LED will flash once.

2. Activate ABLK04F pairing mode by pressing the button next to the 

    ON / OFF Switch. The blue LED will start to flash.

3. Activate your Smartphone’s/Tablet’s Bluetooth function and search for devices.

4. Select ABLK04F from the device list to initiate the pairing process.

5. Please enter the 4 digit PIN code shown on the screen on your Smartphone

    / Tablet on the keyboard and press “Enter”. The blue LED will turn OFF.

6. The keyboard should be paired/connected and ready to use.