Premium PIA12067B Owner's Manual

ON/OFF

Emergency 
button

The  emergency  button  in some 
models could be on the right part
of the unit under the front panel.

The appliance  is preset  auto - restart  function  by 
manufacturer. With this function the air conditioner 
can keep the selected settings  after a blackout or a 
voltage drop.

Lift the unit s front panel to reach the emergency 
button of the 

air conditioner 

1. If you press the button once ( one beep ),  the 
    

air conditioner will work in forced 

    cooling function; 
2. If  you  press the button twice ( two beeps ), the 
    unit will work in forced heating function. 
3. To  switch  off  the  unit, you just need  to press 
    the button again ( a single long beep).  After 30 
    minutes in forced function, the 

air 

    conditioner  will automatically start working in 
    FEEL mode . The FEEL function is described in 
    page 13.

inverter 

inverter 

inverter 

If the remote control is lost, proceed as follows:

display PCB

front panel

To deactivate the AUTO-RESTART function, pro-
ceed as follows:

1. Switch the 

air conditioner off and plug it off.

inverter 

2. Press  the  emergency  button  meanwhile  plug 
    it in.

 3. Keep  pressing  the  emergency  button for more 
     than 10  seconds until you hear four short beeps 
     from the unit. The AUTO-RESTART function is  
     off.

   To  activate  the  AUTO - RESTART  function, 
   follow  the  same procedure until you hear three 
   short beeps from the unit.

Emergency 
button

ON / OFF

POWER SLEEP

TIMER RUN

6

Emergency 
button

Remark: the external static pressure of  heat pumps is 0 Pa for all models.