Samsung ME18H704SFG/AA Installation Instruction

Page of 20
10
Step-by-step installation guide
D.  ALIGNING THE WALL PLATE
CL
CAUTION: Wear gloves to avoid cutting  
fingers on sharp edges.
Area E
Hole B
Hole A
Centerline
notches
Draw a Vertical Line
on Wall from Center
of Top Cabinet
Draw a Horizontal line on wall from 
bottom of  “Rear Wall Template”.
Horizontal Line
Horizontal Line
Draw a horizontal line on the wall along the bottom of 
the “Rear Wall Template”.
Draw a vertical line on the 
wall to mark the center of 
the cabinet above.
Horizontal Line
Horizontal Line
Area E
Centerline 
notches
Hole A
Hole B
CAUTION: Wear gloves to avoid cutting fingers 
on sharp edges.
1.  Draw a horizontal line on the wall at the 
bottom of the “Rear Wall Template”.
2.  Drill ⅝˝ holes for toggle bolts in 3 locations 
(Hole A, Hole B, Hole C) as shown in the 
illustration above. If the location of a hole 
lines up with a stud, drill a 
3
/
16
˝ hole for a 
wood screw. You cannot use a toggle bolt to 
attach the wall plate to a stud.
 
NOTE: DO NOT MOUNT THE PLATE AT 
THIS TIME.
3.  Holes A, B and C are inside area E. If none 
of these holes line up with a stud, find a stud 
in area E that lines up with a hole circle in 
Area E, and then drill a 
3
/
16
˝ hole into it for 
a wood screw. You must have at least one 
wood screw mounted firmly into a stud to 
support the weight of the microwave. Set 
the mounting plate aside.
SMH1927_XAA_DE68-04108A-02_EN_120725.indd   10
5/3/2013   8:45:20 AM
downloadlike
ArtboardArtboardArtboard
Report Bug