Samsung ME18H704SFG/AA Installation Instruction

Page of 20
12
Step-by-step installation guide
A.  OUTSIDE TOP EXHAUST 
(VERTICAL DUCT)
A1.  INSTALLATION PROCEDURE FOR 
THE EXHAUST ADAPTOR AND 
PROPER DAMPER OPERATION 
CHECK
The exhaust Adaptor and Damper are 
shipped assembled and attached to 
the fi ller-upper.
1.  Slide the exhaust adaptor into place as shown 
in the diagram above.
2.  Make sure the tape securing the damper is 
removed and damper pivots easily before you 
mount the microwave.
CAUTION: You will need to make adjustments to 
assure proper alignment with your house exhaust 
duct after the microwave is installed.
A2.  ADJUST THE EXHAUST ADAPTOR
After you have installed the microwave, you will 
need to open the top cabinet and adjust the exhaust 
adaptor so that you can connect it to the house 
duct.
For Front-to-Back 
Adjustment, Slide the 
Exhaust Adaptor as Needed
Blower Plate
Back of 
Microwave
Damper
NOTE: You must attach the house duct to the 
exhaust adaptor after installation is complete.
House Duct
House Duct
B.  RECIRCULATING (NON-VENTED 
DUCTLESS)
B1.  ADAPTING THE MICROWAVE 
BLOWER FOR RECIRCULATION
2. Lift up the 
blower plate.
1. Remove and save the screws 
that hold the blower plate to the 
microwave.
Back of 
Microwave
NOTE: The exhaust adaptor with the damper is not 
needed for recirculating models. You may want to 
save them for possible future use.
SMH1927_XAA_DE68-04108A-02_EN_120725.indd   12
5/3/2013   8:45:21 AM
downloadlike
ArtboardArtboardArtboard
Report Bug