Samsung ME18H704SFG/AA Installation Instruction

Page of 20
13
Step-by-step installation guide
3.  Remove the screw that holds the blower motor 
and carefully pull out the blower unit. The wires 
will extend far enough to allow you to adjust the 
blower unit.
blower mortor screw
CAUTION: To avoid breaking or cracking the blower 
blade, do not touch the blade. Hold the outer case 
of the blower when you pull it out or put it back in 
place.
4.  Roll the blower unit 90 ° so that the fan blade 
openings are facing toward the front of the 
microwave.
Back of 
Microwave
Before Roll
After Roll
Back of 
Microwave
5.  Place the blower unit back into the opening.
CAUTION: Do not pull or stretch the blower unit 
wiring. Make sure the wires are not pinched.
6.  Secure the blower unit to the microwave with the 
screw.
B2.  INSTALLING THE CHARCOAL 
FILTER
1.  Remove the screws on the top of the grille using 
a #1 Phillips screwdriver.
2.  Open the door.
3.  Remove the grille.
•  Push the grille left, and then pull the grille straight 
off.
Charcoal filter
4.  Install the charocal filter. When properly installed, 
the wire mesh of the filter should be visible from 
the front.
5.  Reinstall the grille and the screws.
6.  Close the door.
Insert mesh-side up
SMH1927_XAA_DE68-04108A-02_EN_120725.indd   13
5/3/2013   8:45:22 AM
downloadlike
ArtboardArtboardArtboard
Report Bug