Samsung ME18H704SFG/AA Installation Instruction

Page of 20
7
General information
# 1 and #2 Phillips 
screwdriver
Pencil
Ruler or tape measure and 
straight edge
Carpenter square (optional)
Tin snips (for cutting 
damper, if required)
Scissors (to cut 
template, if necessary)
Electric drill with 
3
/
16
˝, ½˝ and 
⅝˝ drill bits
Filler blocks or scrap wood 
pieces, if needed for top 
cabinet spacing (used on 
recessed bottom cabinet 
installations only)
Gloves
Saw (saber, hole or 
keyhole)
Stud finder or Hammer 
(optional)
Safety goggles
Level
Duct and masking tape
TOOLS YOU WILL NEED
16 ½˝
30˝
30˝ min.
Bottom edge of the 
cabinet needs to be 30˝ 
or more from the cooking 
surface.
Backsplash
NOTES:
•  The space between the cabinets must be 30˝ wide and 
free of obstructions.
•  This microwave oven is for installation over ranges up 
to 36˝ wide.
•  If you are going to vent your microwave oven to the 
outside, see the Hood Exhaust Section for exhaust 
duct preparation.
•  If installing the microwave oven beneath smooth 
flat cabinets, be careful to follow the instructions 
on the top cabinet template for power cord 
clearance.
•  Maximum cabinet depth above and beside the 
unit is 12˝.
•  The dimensions provided are the minimum 
required for mounting the microwave oven. Local 
codes and the practical use of the range will 
likely require you to provide more than the 13.5˝ 
shown between the range and the bottom of the 
microwave.
MOUNTING SPACE
12˝ max.
SMH1927_XAA_DE68-04108A-02_EN_120725.indd   7
5/3/2013   8:45:02 AM
downloadlike
ArtboardArtboardArtboard
Report Bug