Frigidaire FPID2497RF User Manual

Page of 20
6
Status Window
The STATUS window indicates the following 
activity:
1-24................ 
Number of delay start  
 
 
hours.  The last hour  
 
 
will count down in    
  minutes.
CL.................... 
Close dishwasher    
 
               door.  The status    
              
indicator lights will    
                             also fl ash to indicate  
                             current cycle status.
MINUTES.......... 
Number of minutes   
                             left in cycle (1-199).  
                              
 
 
 
OPERATING INSTRUCTIONS
To Cancel a Cycle
To Cancel a Cycle
To cancel a cycle at anytime, open the door and 
To cancel a cycle at anytime, open the door and 
press the START/CANCEL pad until the 1 min drain 
press the START/CANCEL pad until the 1 min drain 
feature is initiated.  Close the door and the drain 
feature is initiated.  Close the door and the drain 
cycle will begin.  You will hear a tone for the start 
cycle will begin.  You will hear a tone for the start 
and completion of the drain cycle.  When the door 
and completion of the drain cycle.  When the door 
is opened, the last cycle selected will be displayed.  
is opened, the last cycle selected will be displayed.  
If desired, a new cycle can now be selected, press 
If desired, a new cycle can now be selected, press 
START/CANCEL pad and upon closing the door the 
START/CANCEL pad and upon closing the door the 
cycle will begin.
cycle will begin.
Delay Start
The DELAY START option allows you to 
automatically delay starting your dishwasher from 
1-24 hours.
To activate press the DELAY START pad until the 
desired delay time shows in the STATUS window 
and press START.  
To cancel the DELAY START option and begin the 
cycle before the delay period is over, press the 
START/CANCEL pad until the status window show 
cycle duration.  Press START/CANCEL again and 
close the door.
Child Lock Controls
To prevent children from accidently changing the 
To prevent children from accidently changing the 
dishwasher cycle or starting the dishwasher, lock 
dishwasher cycle or starting the dishwasher, lock 
the dishwasher controls by pressing the DELAY 
the dishwasher controls by pressing the DELAY 
START pad for 3 seconds and releasing.  The status 
START pad for 3 seconds and releasing.  The status 
window will display “loc”.  To unlock the controls, 
window will display “loc”.  To unlock the controls, 
press the DELAY START pad until “loc” goes out.
press the DELAY START pad until “loc” goes out.
Blue Light
Blue Light
When the BLUE LIGHT illuminates on the fl oor this 
When the BLUE LIGHT illuminates on the fl oor this 
indicates that the wash cycle is complete.
indicates that the wash cycle is complete.
L1----L4............      Level of Rinse Aid       
L1----L4............      Level of Rinse Aid       
 
              dosage.
 
              dosage.
E r r o r   C o d e s
Displayed 
Error Code*
Problem
Solution
i10
A low fi ll has been 
detected.
Look for a pinched water supply line, or water shutoff is 
not completely opened.
i20; 
i40; 
iF0
Clogged fi lters or a 
restricted drain line 
has been detected.
Check and clean both fi lters and sump area and check 
for a pinched or blocked drain hose.  If the drain line is 
attached to a disposer, check that the knockout plug has 
been removed.
i30
A leak or overfl ow 
of water has been 
detected in the 
bottom pan.
Look for loose connections at the water inlet valve and 
ensure the unit is properly leveled.  
i50
A problem has been 
detected with the 
drain or wash motor.
i60
A problem has been 
detected with the 
water heating system.
iC0
A problem has been 
detected with the 
electronic control 
system.
Pressing the cancel button or turning power off at the 
breaker for 5 min. should clear this error code and the 
unit can be restarted.   
 
 
 
 
          
      If this does not resolve the problem, service  
 
          will need to be called.
*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5 
min. does not resolve the problem,  contact the Frigidaire Customer Care Center at 1-800-944-9044.