BlueStream BS27BS Owner's Manual
ADJUSTING THE VOLUME
To Increase Volume press and hold the VOL+ / NEXT button.
To Decrease Volume press and hold the VOL- / PREV button.
The volume will continue to Increase / Decrease until you release the button. When the speaker
makes two short “beeps” the speaker volume has reached the Maximum / Minimum volume level.
CAUTION: The Volume can also be adjusted directly on your Bluetooth device. It is important to
insure the Volume on your Bluetooth device is not set too low or too high, as this will cause
distortion and can damage the BS27BS.
USING THE SPEAKER FOR HANDS-FREE PHONE CALLS
Once your smartphone has successfully paired with the BS27BS, you can use the Speaker &
Built-in Microphone for hands-free calls.
To answer a call simply press the PLAY / PAUSE / ANSWER / END button.
To end a call press the PLAY / PAUSE / ANSWER / END button again.
NOTE: For best call quality you will need to be close to the BS27BS so you can speak directly
into the MIC located on top of the speaker.
USING NON-BLUETOOTH DEVICES
If you wish to use a device that does not have Bluetooth functionality with the BS27BS, simply
connect one end of the supplied 3.5mm Audio Cable into the Headphone Jack of your device and
the other end into the 3.5mm AUDIO INPUT on the BS27BS.
NOTE: When using the 3.5mm AUDIO INPUT the Bluetooth functions of the BS27BS are not
available and the LED INDICATOR will turn BLUE. To resume Bluetooth operations simply
unplug the cable from the 3.5mm AUDIO INPUT and the BS27BS will automatically re-pair with
your Bluetooth device.
TROUBLESHOOTING
1. Speaker will not turn ON
To Increase Volume press and hold the VOL+ / NEXT button.
To Decrease Volume press and hold the VOL- / PREV button.
The volume will continue to Increase / Decrease until you release the button. When the speaker
makes two short “beeps” the speaker volume has reached the Maximum / Minimum volume level.
CAUTION: The Volume can also be adjusted directly on your Bluetooth device. It is important to
insure the Volume on your Bluetooth device is not set too low or too high, as this will cause
distortion and can damage the BS27BS.
USING THE SPEAKER FOR HANDS-FREE PHONE CALLS
Once your smartphone has successfully paired with the BS27BS, you can use the Speaker &
Built-in Microphone for hands-free calls.
To answer a call simply press the PLAY / PAUSE / ANSWER / END button.
To end a call press the PLAY / PAUSE / ANSWER / END button again.
NOTE: For best call quality you will need to be close to the BS27BS so you can speak directly
into the MIC located on top of the speaker.
USING NON-BLUETOOTH DEVICES
If you wish to use a device that does not have Bluetooth functionality with the BS27BS, simply
connect one end of the supplied 3.5mm Audio Cable into the Headphone Jack of your device and
the other end into the 3.5mm AUDIO INPUT on the BS27BS.
NOTE: When using the 3.5mm AUDIO INPUT the Bluetooth functions of the BS27BS are not
available and the LED INDICATOR will turn BLUE. To resume Bluetooth operations simply
unplug the cable from the 3.5mm AUDIO INPUT and the BS27BS will automatically re-pair with
your Bluetooth device.
TROUBLESHOOTING
1. Speaker will not turn ON
a. Make sure the ON / OFF SWITCH is set to the ON position.
b. Charge the battery
b. Charge the battery
2. Speaker will not Pair
a. Turn your Device OFF & ON again to refresh the Bluetooth Memory
b. Turn the speaker OFF & ON again to attempt to re-pair with your device
c. Try pairing another Bluetooth device
b. Turn the speaker OFF & ON again to attempt to re-pair with your device
c. Try pairing another Bluetooth device
3. No Sound
a. Make sure the volume on the BS27BS is not set to “0” or Mute
b. Make sure the volume on your device is not set to “0” or Mute
c. Make sure there is nothing plugged into the 3.5mm AUDIO INPUT
b. Make sure the volume on your device is not set to “0” or Mute
c. Make sure there is nothing plugged into the 3.5mm AUDIO INPUT
For Assistance call 1-855-994-2825 or visit www.SIBrandssupport.com