Denon AVR-S700W Owner's Manual
9
Move the Sound calibration microphone to position 2,
select “Continue”, then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to six positions.
Measurements can be made in up to six positions.
.
Place the microphone ear level at the 2nd listening position,
which should be no more than 2ft (60cm) away from the 1st
position, then select “Continue”...
which should be no more than 2ft (60cm) away from the 1st
position, then select “Continue”...
Ear Height
Speaker Calibration
Continue
Back
To skip measuring the second and subsequent listening position, press o to
select “Complete” and press ENTER to proceed to step 12.
n Stopping Audyssey
®
Setup
A Press BACK to display the popup screen.
B
B
Press o to select “Yes”, then press ENTER.
10
Repeat step 9, measuring positions 3 to 6.
11
Select “Complete”, then press ENTER.
.
Audyssey Setup
Continue
Repeat Last Test
Measurements Complete
Select “Continue” to analyze the data...
Select “Continue” to analyze the data...
Start the analysis and storage of the measurement results.
0
Analysis takes several minutes to complete.
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
NOTE
When the measurement results are being saved, make sure the power is not
turned off.
162