Denon AVR-S700W Owner's Manual

o Add New Feature

Display new features that can be downloaded to this unit and perform

an upgrade.

Display the items to be upgraded.

Display a list of the additional functions provided by

the upgrade.

Execute the upgrade process.

When the upgrade starts, the menu screen is shut

down. During the upgrade, the amount of upgrade

time which has elapsed is displayed.

0 See the Denon website for details about upgrades.
0 When the procedure is complete, “Registered” is displayed in this menu and

upgrades can be carried out. If the procedure has not been carried out, “-------”

is displayed.

The ID number shown on this screen is needed when carrying out the

procedure.

The ID number can also be displayed by pressing and holding the main unit’s

ZONE2 SOURCE and TUNE + for at least 3 seconds.

0 If the upgrade is not successful, an error message identical to those in

“Firmware” - “Update” will appear on the display. Check the settings and

network environment and then perform the upgrade again.

0

In order to use these functions, you must have the correct system

0

Do not turn off the power until updating or upgrading is completed.

0

Approximately 1 hour is required for the updating/upgrading procedure

to be completed.

0

Once updating/upgrade starts, normal operations on this unit cannot

be performed until updating/upgrading is completed. Furthermore,

there may be cases where backup data is reset for the parameters,

etc., set on this unit.

0

If the update or upgrade fails, press and hold the X on the main unit for

more than 5 seconds, or remove and re-insert the power cord. “Update

Retry” appears on the display and update restarts from the point at

which update failed. If the error continues despite this, check the

network environment.

Information regarding the “Update” function and “Add New Feature” will be

announced on the Denon web site each time related plans are defined.

187