HP OJ4620 Owner's Manual

English

Set up wireless (802.11) communication

Change the connection type

After you have installed the HP software and connected the printer to your computer or to a network, you can

change the connection type.

•

To change from a wireless connection to a USB connection, connect the USB cable to the printer.

•

To change from a USB connection to a wireless connection, follow the instructions for your operating system.

Mac OS X

Windows

1. Open HP Utility. (HP Utility is located in the

Hewlett-Packard folder in the Applications

folder at the top level of the hard disk.)

2. Click Applications on the toolbar.
3. Double-click HP Setup Assistant, and then

follow the onscreen instructions.

1. On the computer desktop, click Start, select

Programs or All Programs, click HP, select

your printer name, and then click Printer

Setup & Software.

2. Click Convert a USB connected printer to

wireless.

3. Follow the display instructions to complete

the setup.

Step 2: Test the wireless connection

To test the wireless connection and make sure it is

working properly, complete the following steps:
1. Make sure the printer is turned on and paper is

loaded in the tray.

2. On the printer control panel, press the

(Wireless) button.

3. Using the buttons on the right, scroll to and select

Print Reports, and then select Wireless Test

Report.

The printer prints a report with the results of the test. If

the test fails, review the report for information on how

to fix the problem and rerun the test.
For additional troubleshooting information, see