KitchenAid KSEG700ESS-SS Use & Care Manual

Roll-Out Rack

The roll-out rack allows easy access to position and remove food in 
the oven. It is not recommended to use the roll-out rack in the top 
rack, position 7, or the bottom rack, position 1.

To Insert Roll-Out Rack

1. Angle the front of the rack assembly up, and then insert the 

rack frame into the “V” cutout in the rack guides of the oven 
cavity. 

2. Keep rack assembly lifted up at an angle, and then push in to 

bypass the lower “V” cutout.

3. Lower the front of the rack assembly, and then gently slide 

rack assembly into oven, bypassing the “V” cutouts. Push the 
rack assembly into the oven until it stops at the ladder in the 
back of the oven. 

4. Reach through the rack to hold the sliding rack and the front 

crossbar. Lift the front of the rack assembly, and then push the 
rack assembly to the back of the oven. Lower the front of the 
rack assembly so the ladder hook engages with the ladder on 
both sides of the oven.

To Remove Roll-Out Rack

1. Push the sliding rack in completely so that it is in the closed 

and engaged position.

2. Reach through the rack to hold the sliding rack and the front 

crossbar. Lift the front of the rack assembly to disengage the 
ladder hook from the ladders at the rear of the oven, and then 
pull the rack assembly forward.

3. Using 2 hands, gently pull the sliding rack and the rack frame 

at the same time to the “V” cutout. Angle the rack so that the 
front is higher than the back, and then gently pull rack past “V” 
cutout and then out of the oven.

To avoid damage to the sliding rack, do not place more than 25 lbs 
(11.4 kg) on the rack. 

Do not clean the roll-out rack in a dishwasher. It may remove the 
rack’s lubricant and affect its ability to slide.

See the “General Cleaning” section for more information.

A

B

A

B

A

B

A

B

C

D

A

B