KitchenAid KECC604BBL Owner's Manual
5
COOKTOP CONTROLS - TOUCH-ACTIVATED CONTROLS
Cooktop Controls
The electronic touch controls offer a variety of heat settings for
optimal cooking results. When you are melting foods such as
chocolate or butter, or when proofing bread, the surface cooking
area can be set to Power Level 1 for minimal element operation.
optimal cooking results. When you are melting foods such as
chocolate or butter, or when proofing bread, the surface cooking
area can be set to Power Level 1 for minimal element operation.
For maximum element operation, all cooktop touch controls can
be set to High when bringing liquids to a fast and rapid boil.
Touch Power Level 9 to immediately reach the highest setting.
be set to High when bringing liquids to a fast and rapid boil.
Touch Power Level 9 to immediately reach the highest setting.
To Use:
To Turn On the Cooktop:
1. Press POWER
The indicator light above the Power keypad and a dash (“-”)
in each surface cooking area will light to indicate that each
surface cooking area is ready to be activated. Inactivity for
1 minute after the main power has been turned on will
automatically turn off the power to the cooktop.
in each surface cooking area will light to indicate that each
surface cooking area is ready to be activated. Inactivity for
1 minute after the main power has been turned on will
automatically turn off the power to the cooktop.
To Turn On a Surface Cooking Area:
1. Touch the display area for the surface cooking area you want
to use.
The current power level and indicator light will flash for
10 seconds then remain on.
10 seconds then remain on.
Touching any other feature or the power slider stops the
flashing and information for the keypad that was touched will
be displayed.
flashing and information for the keypad that was touched will
be displayed.
When a surface cooking area is left at the “0” power level for
1 minute, the surface cooking area will automatically turn off
and display only the middle dash without the indicator light.
1 minute, the surface cooking area will automatically turn off
and display only the middle dash without the indicator light.
2. Select a heat setting from 1-9 by touching/sliding on the
power slider. The heat setting will appear in the surface
cooking area display.
cooking area display.
If a cooking function or the power slider is touched without
first selecting a surface cooking area, all dashes (one for each
zone) will flash and an invalid tone will sound 3 times.
first selecting a surface cooking area, all dashes (one for each
zone) will flash and an invalid tone will sound 3 times.
Use the following chart as a guide when setting heat levels.
NOTE: Elements will not glow red on all settings.
A. Power level display/active surface area
selector
B. Zone size indicator (flexible dual/triple
zones only)
C. Automatic cooking function (Simmer,
Melt, Keep Warm) indicator
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
A
B
C
A. Power level slide touch control
SETTING
RECOMMENDED USE
High
9
■
Start food cooking.
■
Bring liquid to a boil.
Medium High
Between 7-8
Between 7-8
■
Hold a rapid boil.
■
Quickly brown or sear food.
Med
6
■
Maintain a slow boil.
■
Fry or sauté foods.
Medium Low
Between 3-5
Between 3-5
■
Cook soups, sauces and
gravies.
gravies.
■
Stew or steam food.
Low
Between 1-2
■
Provide lowest heat setting.
Dual/Triple Elements
■
Large-diameter cookware.
■
Large quantities of food.
■
Home canning.
Simmer (S)
■
Simmer sauces.
Melt (M)
■
Melt chocolate or butter.
Keep Warm (W)
■
Keep cooked foods warm.
A
REMEMBER: When cooktop is in use, the entire cooktop
area may become hot.
area may become hot.