Lorex LH03081TC4W Instruction Manual
4. Click Display>Output.
00
1
2
3
4.1.
Under View Setup, select Enable. This lets you select and arrange the chan-
nels you want to show on the screen.
nels you want to show on the screen.
Note
Enabling View Setup disables your ability to change channels the normal way on the se-
lected monitor. You will need to disable View Setup to return to normal operation.
lected monitor. You will need to disable View Setup to return to normal operation.
4.2.
Under View Mode, select the desired viewing mode: Single, Quad, Nine (8/
16-channel models only), or Sixteen (16-channel models only).
16-channel models only), or Sixteen (16-channel models only).
4.3.
Click Vout Setup. A menu appears that allows you to select the arrangement of
channels.
channels.
5. Click the drop-down menus to select which channels to show on the screen and the ar-
rangement of channels.
6. Click Apply to save changes. Click Ok. Right-click repeatedly to and return to live
viewing.
7. Press 0 on the remote control 3 times to restore the system interface to the VGA/HDMI
monitor.
#LX400008; r. 2.0/12067/12067; en-US
136