Lorex LH03081TC4W Instruction Manual
Error
Possible Causes
Solutions
•
There is no picture on moni-
tor/TV after connecting it to
the DVR.
tor/TV after connecting it to
the DVR.
•
Monitor/TV not detected by
DVR.
DVR.
•
Power off the monitor/TV and
DVR. Power on the monitor/
TV, and then power on the
DVR.
DVR. Power on the monitor/
TV, and then power on the
DVR.
•
Input channel for DVR not se-
lected on monitor/TV.
lected on monitor/TV.
•
On the monitor/TV, select the
input channel the DVR is con-
nected to.
input channel the DVR is con-
nected to.
•
Video cable is loose or has
become disconnected.
become disconnected.
•
Check the video cable con-
nection to the DVR and moni-
tor/TV.
nection to the DVR and moni-
tor/TV.
•
Video-out resolution has
been set to the incorrect
setting.
been set to the incorrect
setting.
•
Press and hold the
but-
ton on the remote control un-
til the DVR restarts. The DVR
will reset to the default reso-
lution (1024x768).
til the DVR restarts. The DVR
will reset to the default reso-
lution (1024x768).
•
Mouse not detected by
system.
system.
•
Mouse cable is not firmly
connected to the system.
Mouse is not connected to
the system.
connected to the system.
Mouse is not connected to
the system.
•
Firmly connect the mouse ca-
ble to one of the USB ports.
ble to one of the USB ports.
•
System needs to be reset
•
Power off the system (discon-
nect power cable). Firmly
connect a USB mouse to one
of the USB ports. Reconnect
the power cable to the DC
12V port on the rear panel.
nect power cable). Firmly
connect a USB mouse to one
of the USB ports. Reconnect
the power cable to the DC
12V port on the rear panel.
•
There is no picture on se-
lected channels / camera
picture is not being displayed.
lected channels / camera
picture is not being displayed.
•
Camera cables are loose or
have become disconnected.
have become disconnected.
•
Check the camera video ca-
ble and connections.
ble and connections.
•
Disconnect and reconnect
the cable at the system and
at the camera.
the cable at the system and
at the camera.
•
Try moving the camera to an-
other channel or use another
cable.
other channel or use another
cable.
•
The image on the DVR ap-
pears, but does not have
sound.
pears, but does not have
sound.
•
Audio cables are loose or
have been disconnected.
have been disconnected.
•
Check the AUDIO Input con-
nections to the DVR.
nections to the DVR.
•
Volume on external speakers
(not included) is low or off.
(not included) is low or off.
•
Increase volume on external
speakers (not included).
speakers (not included).
•
The system beeps at startup.
•
The beep at startup is normal.
•
The system beeps during
motion detection.
motion detection.
•
Motion detection is enabled
and the alarm buzzer is
activated.
and the alarm buzzer is
activated.
•
Open the Main Menu and
click System>Motion. In the
Buzzer drop-down, select Off.
Click Apply.
click System>Motion. In the
Buzzer drop-down, select Off.
Click Apply.
#LX400008; r. 2.0/12067/12067; en-US
154