Lorex LH03081TC4W Instruction Manual
6.9.1
Lorex Stratus Connectivity
This system features the exclusive Lorex Stratus Connectivity. This is a cloud service that
allows you to connect to your system over the Internet via a secure handshake with Lorex’s
servers. This means you can easily connect to your system without requiring any network
configuration.
allows you to connect to your system over the Internet via a secure handshake with Lorex’s
servers. This means you can easily connect to your system without requiring any network
configuration.
For details on setting up your system to connect to the Internet using Lorex Stratus
Connectivity:
Connectivity:
OR
Connectivity using Lorex’s free DDNS service is also available, but requires the ports listed
above to be port forwarded on your router.
above to be port forwarded on your router.
6.10
Quick Access to System Information
To quickly open a window that displays vital system information:
• Press the
button on the remote control to open the System Information window.
OR
• Right-click and then click the Main Menu button (
). Login using the DVR user
name and password (the default user name is admin, and the default password is
000000). Then click System>Info.
000000). Then click System>Info.
6.11
Connecting Cameras
CAUTION
Cameras differ in terms of installation or mounting instructions. Please see the documentation that came
with your camera(s) for specific installation instructions.
with your camera(s) for specific installation instructions.
Test the cameras before permanent installation. Plan where you will route the wiring for
the camera and where you will aim the camera.
the camera and where you will aim the camera.
Installation Tips
• Mount the camera where the lens is away from direct and intense sunlight.
• Plan your cable wiring so that it does not interfere with power lines or telephone lines.
• Ensure that the camera wiring is not exposed or easily cut.
• Mount the camera in an area that is visible, but out of reach.
• Avoid pointing the camera at a glass window to see outside, as this may result in a poor
• Plan your cable wiring so that it does not interfere with power lines or telephone lines.
• Ensure that the camera wiring is not exposed or easily cut.
• Mount the camera in an area that is visible, but out of reach.
• Avoid pointing the camera at a glass window to see outside, as this may result in a poor
image caused by glare from indoor / outdoor lighting conditions.
• Adjust the camera angle so that it covers an area with high traffic.
• In "high-risk" locations, have multiple cameras point in the same area. This provides
• In "high-risk" locations, have multiple cameras point in the same area. This provides
camera redundancy if a vandal attempts to damage the camera.
6.11.1
Installing Cameras
1. Mount the camera(s) to the desired mounting surface according to the instructions that
came with the camera(s). Choose a firm mounting surface.
Note
If you wish to mount cameras to drywall, it is recommended to use drywall anchors (not included).
If you wish to mount cameras to drywall, it is recommended to use drywall anchors (not included).
#LX400008; r. 2.0/12067/12067; en-US
12