Lorex LH03081TC4W Instruction Manual

2. Configure the following beside the desired channel:

• Video: Select Enabled or Disabled. If you select Disabled, you will not be able to

view the channel when connecting remotely to the system.

• FPS: Select the desired frames per second.
• Bitrate: Select the desired video bitrate.
• Audio: Select or de-select the checkbox to enable or disable the system from

streaming audio when viewing the system remotely.

3. Click Apply to save your settings.

15.4.5

Setting up Email Notification

The system can send email notifications when it detects motion. Email notifications can al-
so be sent when an alarm device triggers (alarm devices not included; only supported on
certain models).

To set up email notification:

1. Click the Email tab in the Network menu.

2. From the Email drop-down menu, select from:

• Default: Uses the Lorex email server to send out alarm notifications. This is the rec-

ommended selection.

• Enable: Uses custom email server settings.
• Disable: Disables email notification.

If you want to use Lorex’s email server (recommended):

1. In the Email drop-down menu, select Default.
2. In the Sender Email field, enter the email address of the sender. This can be any

email address of your choice.

3. In the Receiver Email field, enter the email address you want the DVR to send alarm

notifications to.

4. In the Interval drop-down menu, enter the duration the DVR must wait before sending

out a new notification.
For example, if you select a 3 minute interval, the DVR will send out email notifications
every 3 minutes until the DVR stops detecting motion / alarm. The DVR will only send
out notifications when it detects motion / alarm triggers.

5. Click Apply to save your settings.

#LX400008; r. 2.0/12067/12067; en-US