Pioneer VSX-824-K Owner's Manual

4

61

9

An MHL-compatible mobile device can be connected to enjoy 

full-HD videos, high quality multi-channel audio, and photos 

etc., with charge the battery on the receiver. Use the MHL 

cable (sold separately) to connect the device.



•

The MHL-compatible device is recharged whenever it is 

connected to this unit. (Recharging is enabled only when 

the unit’s power is turned on.)

•

For instructions on playing the MHL-compatible device, see 

Playing a MHL-compatible device on page 33

.

•

Do not place the MHL device on this unit which has the 

power turned ON.

Connect the Roku Streaming Stick (sold separately) to the 
MHL

 terminal on the receiver to enjoy video streaming, see 

Enjoy Roku video streaming service on page 33

.

•

When the Roku Streaming Stick (sold separately) is 

connected to the receiver via the MHL terminal, and the 

power switched on for the first time, a setup screen will be 

displayed. Setup can be changed later on as well, see 

ROKU standby mode on page 56

.

•

When the Roku Streaming Stick (sold separately) is 

inserted, the unit will switch to MHL input.

Only plug in after you have connected all your components to 

this receiver, including the speakers.



•

Handle the power cord by the plug. Do not pull out the plug 

by tugging the cord and never touch the power cord when 

your hands are wet as this could cause a short circuit or 

electric shock. Do not place the unit, a piece of furniture, 

etc., on the power cord, or pinch the cord. Never make a 

knot in the cord or tie it with other cords. The power cords 

should be routed such that they are not likely to be stepped 

on. A damaged power cord can cause a fire or give you an 

electrical shock. Check the power cord once in a while. 

When you find it damaged, ask your nearest PIONEER 

authorized service center or your dealer for a replacement.

•

The receiver should be disconnected by removing the 

mains plug from the wall socket when not in regular use, 

e.g., when on vacation.

•

After this receiver is connected to an AC outlet, a 2 second 

to 10 second HDMI initialization process begins. You 

cannot carry out any operations during this process. The 
HDMI

 indicator in the front panel display blinks during this 

process, and you can turn on this receiver once it has 

stopped blinking. When you set the Control with HDMI to 
OFF

, you can skip this process. For details about the 

 with HDMI feature, see 

HDMI Setup on page 59

.

MHL-compatible 

device

MHL cable (sold 

separately)

Video camera (etc.)