Pioneer VSX-824-K Owner's Manual

Page of 69
Basic playback
4
4
33
4
61
9
a.
MPEG Layer-3 audio decoding technology licensed from 
Fraunhofer IIS and Thomson multimedia.
b.
Files encoded using Windows Media Codec 9 may be playable 
but some parts of the specification are not supported; 
specifically, Pro, Lossless, Voice.
c.
Uncompressed FLAC files are not supported. Pioneer does not 
guarantee playback.
Photo files
Note
When playing a music file while doing a slide show, make 
sure the contents are less than 48 kHz.
Playing a MHL-compatible device
MHL (Mobile High-definition Link) is an interface standard for 
transmitting digital signals with mobile devices. MHL can 
carry high quality multi-channel audio data and full-HD video 
formats.
The MHL-compatible device’s video signals are output from 
the TV connected to the receiver, the audio signals are output 
from the speakers connected to the receiver or TV.
1
Press 
STANDBY/ON
 to switch on the receiver and 
your TV.
See 
Connecting a MHL-compatible device on page 25
.
2
Press 
MHL ROKU
 on the remote control to switch the 
receiver to the MHL.
3
Select and play the desired contents on the MHL-
compatible device.
Note
MHL-compatible devices can be operated with the 
receiver’s remote control by pressing the remote control’s 
MHL ROKU
 button, but depending on the MHL-compatible 
device being used, some buttons may not be operable.
To playback from a MHL-compatible device connected to 
the receiver on a TV that is also connected to the receiver, 
the power to the receiver must be turned on.
Enjoy Roku video streaming service
Connect the Roku Streaming Stick (sold separately) to the 
MHL
 terminal on the main device to enjoy video streaming.
1
Press 
STANDBY/ON
 to switch on the receiver and 
your TV.
See 
Connecting a MHL-compatible device on page 25
.
2
Press 
MHL ROKU
 on the remote control to switch the 
receiver to the MHL.
3
Select the contents you want to play and playback.
Note
When the Roku Streaming Stick (sold separately) is 
connected to the main device via the MHL terminal, and 
the power switched on for the first time, a setup screen will 
be displayed. Setup can be changed later on as well, see  
Setup ROKU standby mode on page 56
.
Extension
Format
JPEG
.jpg
Meeting the following conditions:
• Baseline JPEG format
• Y:Cb:Cr – 4:2:2