Pioneer VSX-824-K Owner's Manual

4

61

9

Setting up the network to listen to Internet radio on this 

receiver.

Network Setup menu appears on your TV. Use 

///



 and 

 on the remote control to navigate through 

the screens and select menu items. Press 

 to 

exit the current menu.

•

Press 

 at any time to exit the Network 

Setup menu.

•

-

 – Sets up the IP address/Proxy of 

this receiver (see below).

-

 – The name of the receiver displayed 

on a computer or other device connected to the 

network can be changed (see below).

-

 – Restricts usage of network 

functions (

page 47

).

•

 – Language can be set the NETWORK 

function OSD screen (

page 47

).

•

 – Use to update the receiver’s 

firmware and check the version (

page 47

).

•

 – Use to reset all network connection 

settings to their initial, factory-setting condition 

(

page 49

).

•

 – You can check the network settings of 

this receiver (

page 49

).

In case the router connected to the LAN terminal on this 

receiver is a broadband router (with a built-in DHCP server 

function), simply turn on the DHCP server function, and you 

will not need to set up the network manually. You must set up 

the network as described below only when you have 

connected this receiver to a broadband router without a 

DHCP server function. Before you set up the network, consult 

with your ISP or the network manager for the required 

settings. It is advised that you also refer to the operation 

manual supplied with your network component.

IP Address
The IP address to be entered must be defined within the 

following ranges. If the IP address defined is beyond the 

following ranges, you cannot play back audio files stored on 

components on the network or listen to Internet radio 

stations.
Class A: 10.0.0.1 to 10.255.255.254
Class B: 172.16.0.1 to 172.31.255.254
Class C: 192.168.0.1 to 192.168.255.254

Subnet Mask
In case an xDSL modem or a terminal adapter is directly 

connected to this receiver, enter the subnet mask provided 

by your ISP on paper. In most cases, enter 255.255.255.0.

Default Gateway
In case a gateway (router) is connected to this receiver, 

enter the corresponding IP address.

Primary DNS Server/Secondary DNS Server
In case there is only one DNS server address provided by 

your ISP on paper, enter it in the “Primary DNS Server” 

field. In case there are more than two DNS server 

addresses, enter “Secondary DNS Server” in the other 

DNS server address field.

Proxy Hostname/Proxy Port
This setting is required when you connect this receiver to 

the Internet via a proxy server. Enter the IP address of your 

proxy server in the “Proxy Hostname” field. Also, enter the 

port number of your proxy server in the “Proxy Port” field.

Select the DHCP setting you want.
When you select ON, the network is automatically set up, 

and you do not need to follow Steps 4. Proceed with Step 

5.
If there is no DHCP server on the network and you select 
ON

, this receiver will use its own Auto IP function to 

determine the IP address.

•

The IP address determined by the Auto IP function is 

169.254.X.X. You cannot listen to an Internet radio 

station if the IP address is set for the Auto IP function.

Enter the IP Address, Subnet Mask, Default Gateway, 
Primary DNS Server and Secondary DNS Server.
Press 

/

 to select a number and 

/

 to move the 

cursor.

Select ‘OFF’ or ‘ON’ for the Enable Proxy Server setting 
to deactivate or activate the proxy server.
In case you select OFF, proceed with Step 8. In case you 

select ON, on the other hand, proceed with Step 6.

Enter the address of your proxy server or the domain 
name.
Use 

/

 to select a character, 

/

 to set the position, 

and 

 to confirm your selection.

Enter the port number of your proxy server.
Use 

/

 to select a character, 

/

 to set the position, 

and 

 to confirm your selection.