Siemens WLAN Repeater 108 S30853-H1030-R701 User Manual

Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-3x-7619 / basic_config.fm / 06.11.2008

Te

m

plat

e 20

05_0

5_02

As described in the "First Steps" on page 11 chapter, you have connected your 
Gigaset WLAN Repeater 108 and made any changes necessary to the Ethernet card's 
network configuration (see the chapter "Integration in the network" on page 84). 
Your Gigaset WLAN Repeater 108 is connected to the mains power supply, the 
Power LED lights up, as does the WLAN LED. The LED for the local network lights up 
if you have connected a device directly using an Ethernet cable.
To access the Gigaset WLAN Repeater 108's user interface:

ì

Launch your Web browser.

ì

Enter the IP address of the Gigaset WLAN Repeater 108 in the browser's address 
field. 

 

The login screen appears.

ì

The factory settings password is admin. Enter the password and click OK.

Please note: 
If the DHCP server in your Gigaset WLAN Repeater 108 has been activated (factory set-
ting), it may take a while after connecting to your PC until your PC is automatically 
assigned an IP address and you can access the configuration program.

Please note:
For security reasons you should change the password at a later stage (see 
page 38).