Siemens WLAN Repeater 108 S30853-H1030-R701 User Manual
Product codes
S30853-H1030-R701
73
Administration
Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-3x-7619 / admin.fm / 06.11.2008
Te
m
plat
e 20
05_0
5_02
System Log
The System Log is displayed in the Status – Device menu. It can give you important
information about the functioning of your device and possible problems. You can also
have this information transmitted automatically on a system log server.
information about the functioning of your device and possible problems. You can also
have this information transmitted automatically on a system log server.
ì
In the Administration menu, select System Log to make the settings for the log.
ì
Log level: Select how much information is to be contained in the system log. You
can choose between four levels:
– Critical: logs the most important information concerning possible problems in
can choose between four levels:
– Critical: logs the most important information concerning possible problems in
the functioning of your device
– Debugging: complete and detailed information about all your device's functions
– Warning and Informational are intermediate levels.
– Warning and Informational are intermediate levels.
ì
System log server
– Activate this function if you require automatic transmission of your device's sys-
– Activate this function if you require automatic transmission of your device's sys-
tem log to a system log server in your local network.
– Server address:
Enter the IP address for the system log server.
– Server port:
Enter the port of the system log server that is to be used to transmit the system
log.
log.
ì
Click on OK to save and apply the changes. If you have activated the System log
server function, the data will be transmitted to the specified server.
server function, the data will be transmitted to the specified server.