Samsung HT-J4500/ZA User Manual

 - English

Settings

 

The Home menu will not appear if you do not 
configure the initial settings.

 

The OSD (On Screen Display) may change in 
this product after you upgrade the software 
version.

 

The access steps may differ depending on the 
menu you selected.

1.  Turn on your TV after connecting the product, 

and then turn on the product. When you turn 
on the product for the first time, the product 
automatically displays the Setup Language 

screen.

2.  Press the ▲▼ buttons to select the desired 

language, and then press the v button. 

3.  Press the v button to start function setup.

Setup

TV Aspect and Network will be set. 
Each setting may be changed later under "Settings"

a Previous      " Select

Start

4.  The TV Aspect Ratio screen appears. Press the 

▲▼ buttons to select a TV aspect ratio, and 
then press the v button. 
You have four choices: 
16:9 Original - For widescreen TVs. Displays 

widescreen pictures in their original 16:9 format 
and 4:3 pictures (the old, standard format) in 
4:3 pillar box format with black bars on the left 
and right. 
16:9 Full - For widescreen TVs. Displays 

widescreen pictures in their original 16:9 format 
and expands 4:3 pictures to fill the 16:9 screen. 
4:3 Letter Box - For older, standard screen, 

analog TVs. Displays 4:3 pictures in full screen 
and 16:9 pictures in letter box format that 
retains the 16:9 aspect ratio but puts black bars 
above and below the picture. 

4:3 Pan-Scan - For older, standard screen, 

analog TVs. Displays 4:3 pictures in full screen 
and 16:9 pictures in Pan-Scan format that fills 
the screen, but cuts off the left and right sides 
of the picture and enlarges the middle vertically.

5.  The Network - Wired screen appears.

 

- If you have a network with dynamic IP 

addresses - and most people do - select Auto, 

press the v button, and then go to Step 6. 

 

- If you have a network with static IP addresses, 

we suggest you select Skip by pressing the 

 

- If you have no network, select Skip by 

pressing the 

 button. The Initial 

Settings Complete screen appears, and then 
the Home screen appears.

 

✎

If you skip network setup here or the setup 
does not work correctly, you can set up the 
product's network connection later. (See page 
18)

Setup | Network - Wired

Auto

Manual

Choose the method to configure Internet Protocol (IP). Please make sure that the Ethernet 
cable is connected.

Auto : Configure IP automatically.

a Previous      d Skip      < Move      " Select

6.  The product verifies the network connection 

and then connects to the network. When it is 
done, press the v button. The "Initial settings 
completed." screen appears, and then the 

Home screen appears.

Setup | Network - Wired

MAC Address (d0:66:7b:dc:28:fc)
IP Address, Subnet Mask, Gateway, DNS Server
Gateway Ping
Internet Service Test

" Select

OK

Your network is operating properly. If you still have a network problem, contact your  
network service provider.