Sony LBTGPX55 Owner's Manual
model name [LBT-GPX77/GPX55/MHC-GPX88/GPX77/GPX55/GPX33]
[4-449-052-13(1)] GB
28
GB
filename[D:\MASNI JOB
FOLDER\SO130010\GB\4449052131\4449052131\07OTH.fm]
FOLDER\SO130010\GB\4449052131\4449052131\07OTH.fm]
masterpage:Left
Creating a party
atmosphere
atmosphere
(DJ EFFECT)
1
Press the following button to
select the effect type.
select the effect type.
The selected button lights up and the
effect is activated.
• FLANGER: Create a deep flanging
effect is activated.
• FLANGER: Create a deep flanging
effect that is similar to the roar of a
jet plane.
jet plane.
• ISOLATOR: Isolate a specific
frequency band by adjusting the
other frequency bands. For example,
when you want to focus on vocal and
etc.
other frequency bands. For example,
when you want to focus on vocal and
etc.
• SOUND FLASH: Flash the sound
output. The sound cuts off
periodically.
periodically.
• PHASER: Create a series of peaks
and troughs in the frequency
spectrum, like a sweeping effect.
spectrum, like a sweeping effect.
2
Press DJ CONTROL +/– to adjust
the effect level.
the effect level.
To turn off the effect
Press the selected effect button again.
Notes
• The DJ EFFECT is automatically turned off
when you turn off the system or change the
function or tuner band.
function or tuner band.
• If you activate the DJ EFFECT during
transfer, the sound effect will not be
transferred onto the USB device.
transferred onto the USB device.
• You cannot use MASTER VOLUME/
DJ CONTROL on the unit to adjust the
volume when the DJ EFFECT is activated.
Press VOLUME +/– on the remote control to
adjust the volume.
volume when the DJ EFFECT is activated.
Press VOLUME +/– on the remote control to
adjust the volume.
Singing along
(MHC-GPX88 only)
You can sing along with any audio source
that played back on this system.
that played back on this system.
1
Turn MIC LEVEL to MIN to reduce
the microphone volume level.
the microphone volume level.
2
Connect a microphone to the
MIC jack on the unit.
MIC jack on the unit.
3
Start playing the music and
adjust the volume.
adjust the volume.
4
Turn MIC LEVEL to adjust the
microphone volume.
microphone volume.
If acoustic feedback (howling) occurs,
reduce the volume, move the
microphone away from the speakers,
or change the direction of the
microphone.
After you have finished, disconnect the
microphone.
reduce the volume, move the
microphone away from the speakers,
or change the direction of the
microphone.
After you have finished, disconnect the
microphone.
Note
The sound from the microphone will not be
transferred onto the USB device during USB
transferring.
transferred onto the USB device during USB
transferring.
Other Operations