Sony BDVE3100 Owner's Manual

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-11(1)

D:\NORM'S JOB\SONY HA\SO120029\BDV-
E6100_4100_3100_E2100\4446733111_US (U2)\100ADD.fm

masterpage: Right

t If the USB device is connected via a 

USB hub, disconnect it and connect 
the USB device directly to the unit.

t Picture/sound quality may be poor 

depending on Internet content 
providers.

t Picture/sound quality may be 

improved by changing the connection 
speed. Sony recommends a connection 
speed of at least 2.5 Mbps for standard-
definition video and 10 Mbps for high-
definition video.

t Not all videos contain sound.

t Press V to zoom in.

t Check that [Control for HDMI] is set 

to [On] (page 50). 

t If you change the HDMI connection, 

turn the system off and on again. 

t If power failure occurs, set [Control 

for HDMI] to [Off], then set [Control 
for HDMI] to [On] (page 50). 

t Check the following and refer to the 

operating instructions supplied with 
the equipment. 
• The connected equipment is 

compatible with the [Control for 
HDMI] function. 

• The connected equipment’s setting 

for the [Control for HDMI] function 
is correct. 

t Check the network connection 

(page 21) and the network settings 
(page 51).

t The wireless settings of the router may 

change automatically if you use the 
Wi-Fi Protected Setup function before 
adjusting the settings of the router. In 
this case, change the wireless settings 
of your PC accordingly.

t Check if the wireless LAN router is on.
t Check the network connection 

(page 21) and the network settings 
(page 51).

t Depending on the usage environment, 

including the wall material, radio wave 
reception conditions, or obstacles 
between the system and the wireless 
LAN router, the possible 
communication distance may be 
shortened. Move the system and the 
wireless LAN router closer to each 
other.