Sony XBR75X940C Owner's Manual
13
US
US
Attaching the Table-Top
Stand (Alternative)
Stand (Alternative)
You can change the Table-Top Stand from
the edge to the middle position by referring
to the instructions below.
the edge to the middle position by referring
to the instructions below.
Note
• Two or more people are needed to carry out this
installation.
• Be careful not to pinch the finger during
installation.
Note
• Two or more people are needed to carry out this
installation.
• Ensure that there are no objects in front of the
TV.
To bundle the cables
*1 Location of cable clamper when the Table-Top
Stand is attached to middle position.
*2 Location of cable clamper when the Table-Top
Stand is attached to edge position.
Note
• To detach the cable clamper from the TV, press
the top of the clamper
, then pinch as
illustrated.
Middle position
Thick cushion
1
1.5 N∙m/1,5 N∙m
{15 kgf∙cm}
2
IR Sensor
3D Sync
Transmitter
Transmitter
*
2
*
1