Sony MHC-ECL77BT Owner's Manual

Page of 84
29
GB
Additional Inf
MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1)
Additional Information
Information about 
compatible devices
About supported USB devices
 
ˎ This system supports USB Mass 
Storage Class only.
 
ˎ This system supports FAT formatted 
USB devices only (except exFAT).
 
ˎ Some USB devices may not work 
with this system.
About BLUETOOTH communication 
for iPhone and iPod touch
 
 iPhone 5s
 
 iPhone 5c
 
 iPhone 5
 
 iPhone 4s
 
 iPhone 4
 
 iPod touch (5th generation)
 
 iPod touch (4th generation)
Troubleshooting
Make sure the power 
cord and speaker cords 
are correctly and firmly 
connected.
Find your problem in the 
checklist below, and take the 
indicated corrective action.
If the issue persists, contact your 
nearest Sony dealer.
If “PROTECT” appears on the 
display
Immediately unplug the power 
cord, and check the following items 
after “PROTECT” disappears.
 
ˎ Are you using only the supplied 
speakers?
 
ˎ Is anything blocking the 
ventilation holes of the system?
After you have checked these 
above items and found no 
problems, reconnect the power 
cord, and turn on the system. If the 
issue persists, contact your nearest 
Sony dealer.
If “OVER CURRENT” appears on 
the display
A problem has been detected 
with the level of electrical current 
from the   (USB) port. Turn off 
the system and remove the USB 
device from the   (USB) port. Make 
sure there is no problem with the 
USB device. If this display pattern 
persists, contact your nearest Sony 
dealer.