Sony MHC-ECL77BT Owner's Manual

GB

Additional Inf

MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1)

 

ˎ Do not place the system in an inclined 

position or in locations that are extremely 

hot, cold, dusty, dirty, or humid or lacking 

adequate ventilation, or subject to 

vibration, direct sunlight or a bright light.

 

ˎ Be careful when placing the unit or 

speakers on surfaces that have been 

specially treated (for example, with wax, 

oil, polish) as staining or discoloration of 

the surface may result.

 

ˎ If the system is brought directly from a 

cold to a warm location or is placed in a 

very damp room, moisture may condense 

on the lens inside the CD player, and 

cause the system to malfunction. In this 

situation, remove the disc, and leave the 

system turned on for about an hour until 

the moisture evaporates.

 

ˎ Heat buildup on the unit during operation 

is normal and is not cause for alarm.

 

ˎ Do not touch the cabinet if it has been 

used continuously at a high volume 

because the cabinet may have become 

hot.

 

ˎ Do not obstruct the ventilation holes.

This speaker system is not magnetically 

shielded, and the picture on nearby TV 

sets may become magnetically distorted. 

In this situation, turn off the TV, wait 15 to 

30 minutes, and turn it back on.
If there is no improvement, move the 

speakers far away from the TV.

Clean this system with a soft cloth slightly 

moistened with a mild detergent solution. 

Do not use any type of abrasive pad, 

scouring powder, or solvent, such as thinner, 

benzine, or alcohol.

 

ˎ BLUETOOTH devices should be used 

within approximately 10 meters (33 feet) 

(unobstructed distance) of each other. 

The effective communication range may 

become shorter under the following 

conditions.

 

 When a person, metal object, wall 

or other obstruction is between the 

devices with a BLUETOOTH connection

 

 Locations where a wireless LAN is 

installed

 

 Around microwave ovens that are in 

use

 

 Locations where other electromagnetic 

waves occur

 

ˎ BLUETOOTH devices and wireless LAN  

(IEEE 802.11b/g) use the same frequency 

band (2.4 GHz). When using your 

BLUETOOTH device near a device with 

wireless LAN capability, electromagnetic 

interference may occur. This could result 

in lower data transfer rates, noise, or 

inability to connect. If this happens, try the 

following remedies:

 

 Try connecting this system and 

BLUETOOTH device when you are at 

least 10 meters (33 feet) away from the 

wireless LAN equipment.

 

 Turn off the power to the wireless 

LAN equipment when using your 

BLUETOOTH device within 10 meters 

(33 feet).

 

ˎ The radio waves broadcast by this system 

may interfere with the operation of some 

medical devices. Since this interference 

may result in malfunction, always turn off 

the power on this system and BLUETOOTH 

device in the following locations:

 

 In hospitals, on trains, in airplanes, 

at gas stations, and any place where 

flammable gases may be present

 

 Near automatic doors or fire alarms

 

ˎ This system supports security functions 

that comply with the BLUETOOTH 

specification as a means of ensuring 

security during communication using 

BLUETOOTH technology. However, this 

security may be insufficient depending 

on the setting contents and other factors, 

so always be careful when performing 

communication using BLUETOOTH 

technology.

 

ˎ Sony cannot be held liable in any way 

for damages or other loss resulting from 

information leaks during communication 

using BLUETOOTH technology.

 

ˎ BLUETOOTH communication is not 

necessarily guaranteed with all 

BLUETOOTH devices that have the same 

profile as this system.