Whirlpool WDF760SADM Owner's Manual

This information covers several different models. Your dishwasher may not have all of the cycles and options described. Estimated cycle 
times may increase or decrease depending on water temperature, soil conditions, dish load size, and options selected. 

You can customize 

your cycle by selecting an option. 

See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change 
an option anytime before the selected option begins. At each stage of the wash cycle, you may hear noises that you are not used to 
hearing in your previous dishwasher. Each cycle will provide a series of pauses and water sprays throughout the wash cycle. This is 
normal and will provide optimal cleaning performance. 

IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the 
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle 
will automatically compensate by adding time, heat and water as needed.

The most advanced and versatile cycle. This cycle senses load size, soil amount, and 
toughness of soil, to adjust the cycle for optimal cleaning using only the amount of 
water and energy needed. Use for all soil levels.

2:30

3.38 to 7.4

(12.8 to 28.0))

Use for hard-to-clean, heavily soiled pots, pans, casseroles, and tableware.

3:28

7.4

(28.1)

This cycle with only the Heated Dry option selected, and without other options selected, 
is recommended to completely wash and dry a full load of normally soiled dishes. The 
energy usage label is based on this cycle and option combination.

2:32

2.4 to 7.4

(9.09 to 28)

For fast results, 1-Hour Wash will clean dishes using slightly more water and energy. 
Select the Heat Dry option to provide best dry performance.

1:00

7.87 (29.8)

This cycle quietly soaks dishes with an extended prewash which eliminates the need to 
presoak dishes saving personal time and effort. For optimal cleaning results during the 
Soak & Clean cycle add prewash detergent. Use this cycle for loads with heavy amounts 
of dried on or hard to clean baked-on food. 

7:31

7.4 (28.0)

Activates the TargetClean™ spray jets and provides 
intensified water spray to the back of the lower level 
rack.
May add heat and time to the cycle.

Raises main 
wash temperature 
from 105°F 
(41°C) to120°F 
(49°C).

Raises main wash temperature to improve cleaning 
for loads containing tough, baked-on food.

Raises the main 
wash temperature 
to 135°F (57°C)

Sanitizes dishes and glassware in accordance with 
NSF International NSF/ANSI Standard 184 for 
Residential Dishwashers. Certified residential 
dishwashers are not intended for licensed food 
establishments. The Sani indicator indicates at the 
end of the cycle whether the Sani Rinse option was 
successfully completed. If indicator does not 
activate, it is probably due to cycle being interrupted.

Raises the main 
wash temperature 
to 135°F (57°C) 
and the final rinse 
temperature to 
156°F (69°C)