Yamaha YSP-2500 Owner's Manual

PREPARATIONS

➤ Installation

En

This unit reflects sound beams off of walls to create the surround sound effect. The position of this unit in relation to both the listening position and walls is important to achieving the 
desired surround sound effects. When installing this unit on a rack behind which there is limited space, for example, it may be easier to connect external devices to this unit first. This 
will depend upon the installation location. See “Connections” (p. 24) for more information.

❑

The center unit and subwoofer communicate wirelessly. Subwoofer performance may be affected if the subwoofer is placed on a metal rack, or if there is a metal plate between the 
subwoofer and the center unit. Use a wired connection to connect the subwoofer to the center unit if sounds are interrupted due to the installation condition (p. 29).

• Be sure to install this unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.

• The subwoofer speakers are not magnetically shielded. Do not install hard disk drives or similar devices near the subwoofer.

• Do not stack the center unit and subwoofer directly on top of other playback devices, or vice versa. Heat and vibrations may result in damage or malfunction.

Center unit

Subwoofer

* Use the TV Remote Repeater function if the center unit 

obstructs the remote control sensor on the TV (p. 15). 

If the center unit cannot be installed on a TV stand 
because the stand is too high, the height of the center 
unit can be adjusted (p. 16).

• To prevent sound reflecting off of walls, angle the 

subwoofer slightly toward the center of the room.

• When installing the subwoofer on a rack, be sure 

the rack is strong enough to support the subwoofer 
and that it leaves sufficient space for heat 
discharge.

• The subwoofer can also be placed on its side 

• Install the center unit in the center of the left and right 

walls.

• Place the center unit on a TV stand in front of the TV*. 

• This unit can be mounted on a wall using the optional 

Wall Mount Bracket SPM-K20 (p. 19). 

• The listening position (such as sofa, etc.) should be 

located at the front of the center unit.

• The distance between the listening position and the 

center unit should be more than 1.8 m (6 ft).

• To achieve desired surround sound effects, be 

sure that obstacles such as furniture may not 
obstruct the path of sound beams (p. 12).