Yamaha YSP-2500 Owner's Manual

SETTINGS

➤ Setup menu

En

When “AUTO SETUP” in the “IntelliBeam” menu (p. 33) is used, recommended beam 
settings are automatically applied by this unit. However, “HORIZONTAL ANGLE”, 
“BEAM TRAVEL LENGTH”, “FOCAL LENGTH” (except “Center”), and “IMAGE 
LOCATION” settings can later be fine-tuned.

Surround sound channel output can also be modified from the “BEAM” menu.

Adjust the horizontal angle of sound beams for each channel using test tones.

Adjust toward L (left) to move the direction of the output to the left and adjust toward R 
(right) to move it to the right.

Front L, Front R, Center. Surround L, Surround R

L90° to R90°

• Channels that cannot be configured are displayed in grey as settings are specified as indicated in 

Specify the distance that sound beams travel for each channel. The distance starts at 
this unit, ends at the listening position, and includes refraction off a wall. The audio 
delay is adjusted and sound from each channel arrives at the listening position 
simultaneously.

Front L, Front R, Center, Surround L, Surround R

0.3 m to 24.0 m (1.0 ft to 80.0 ft)

• Configure this setting only when you have adjusted “HORIZONTAL ANGLE”.

• Channels that cannot be configured are displayed in grey as settings are specified as indicated in 

➜

➜

Beam angle

Angle to

left

Angle to 
right

Left

W key:
Increase angle.

X key:
Decrease angle.

Right

X key: 
Increase angle.

W key: 
Decrease angle.

➜

➜

The length of each 
arrow indicates the 
beam travel length.