Yamaha YSP-2500 Owner's Manual

Page of 83
TROUBLESHOOTING
➤ Messages
En
72
Remote control
Problem
Cause
Remedy
See page
The remote control does not work 
and/or function properly.
The wrong distance or angle.
The remote control functions within a maximum range of 6 m (20 ft) and no 
more than 30 degrees off-axis from the front panel.
Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is 
striking the remote control sensor of this unit.
Reposition this unit.
The batteries are weak.
Replace all batteries.
The TV cannot be operated using 
the TV Remote Repeater function.
The TV Remote Repeater function is disabled. 
Enable the TV Remote Repeater function.
A remote control using technology other than infrared is used (this unit may 
not support some infrared remote controls).
The TV Remote Repeater function cannot be used. Move the center unit so 
that it does not block the remote control sensor on the TV, and use the TV’s 
remote control to operate the TV.
The center unit and TV are too close together or too far apart.
Move the center unit to adjust the distance between the TV Remote 
Repeater and the TV (remote control sensor). If necessary, adjust the height 
of the center unit.
The center unit’s power cable is unplugged.
Plug in the power cable.
There is an object, such as a power cable, between the center unit and TV.
Remove the obstacle.
Messages
Message
Description
See page
ViewScreen
This unit’s setup menu is displayed on the TV screen. Use the TV screen to configure settings.
Key Locked
The keys on the center unit are locked. Use the remote control.
Sleep XXmin
The Auto Power Standby function will turn this unit off in XX minutes.
Protected
System memory 1, 2, and 3 are protected.
Disable
Key operation is disabled.