Yamaha RXA1040 Owner's Manual
APPENDIX
➤ Information on HDMI
En
149
Audio Return Channel (ARC)
ARC allows you to input TV audio to the unit with the HDMI cable which transmits video
signal to the TV.
signal to the TV.
Check the following after the HDMI Control settings.
1
Select a TV program with the TV remote control.
2
Check that the input source of the unit will be automatically switched
to “AUDIO 1” and the TV audio will be played back on the unit.
to “AUDIO 1” and the TV audio will be played back on the unit.
If you cannot hear the TV audio, check the following:
– “ARC” (p.118) in the “Setup” menu is set to “On”.
– The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack
marked “ARC”) on the TV.
Some HDMI jack on the TV is not compatible with ARC. For details, refer to the
instruction manual for the TV.
instruction manual for the TV.
• If the audio is interrupted while using ARC, set “ARC” (p.118) in the “Setup” menu to “Off” and use an
audio cable (digital optical or stereo pin cable) to input TV audio to the unit (p.26).
• When using ARC, connect a TV with an HDMI cable that supports ARC.
• “AUDIO 1” is set as TV audio input at the factory. If you have connected any external device to the
AUDIO 1 jacks, use “TV Audio Input” (p.117) in the “Setup” menu to change the TV audio input
assignment. To use the SCENE function (p.56), you also need to change the input assignment for
SCENE (TV).
assignment. To use the SCENE function (p.56), you also need to change the input assignment for
SCENE (TV).
HDMI signal compatibility
Audio signals
Video signals
The unit is compatible with the video signals of the following resolutions:
• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending
on the type of the DVD player.
• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction
manual for each device.
• To decode audio bitstream signals on the unit, set the input source device appropriately so that the device
outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual for the playback device.
For details, refer to the instruction manual for the playback device.
Audio signal type
Audio signal format
Compatible media (example)
2ch Linear PCM
2ch, 32 to 192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio
Multichannel Linear PCM
8ch, 32 to 192 kHz, 16/20/24 bit
DVD-Audio, BD (Blu-ray disc),
HD DVD
HD DVD
DSD
2 to 5.1ch, 2.8224 MHz, 1 bit
SACD
Bitstream
Dolby Digital, DTS
DVD-Video
Bitstream
(High definition audio)
(High definition audio)
Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio, DTS-HD
High Resolution Audio, DTS
Express
DTS-HD Master Audio, DTS-HD
High Resolution Audio, DTS
Express
BD (Blu-ray disc), HD DVD
• VGA
• 720p/60 Hz, 50 Hz
• 480i/60 Hz
• 1080i/60 Hz, 50 Hz
• 576i/50 Hz
• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
• 480p/60 Hz
• 4K/60 Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz
• 576p/50 Hz