Yamaha RXA1040 Owner's Manual

PLAYBACK

➤ Playing back music in multiple rooms (multi-zone)

En

■

The following functions are also available when Zone2 is enabled.

Press VOLUME or MUTE.

Press SCENE.

• To register the current settings (input source, volume and tone control) to a scene, 

hold down the desired SCENE key until “SET Complete” appears on the front 
display.

Press SLEEP repeatedly to set the time (120 min, 90 min, 60 min, 30 
min, off).

a Press ZONE CONTROL on the front panel.

b Press TONE/BALANCE repeatedly to select “Treble” or “Bass”.

c Press PROGRAM to make an adjustment.

-10.0 dB to +10.0 dB (2.0 dB increments)

0.0 dB

a Press ZONE CONTROL on the front panel.

b Press TONE/BALANCE repeatedly to select “Balance”.

c Press PROGRAM to make an adjustment.

• When “HDMI OUT2 Assign” (p.122) in the “Setup” menu is set to “Zone2”, the 

following functions are not available.

– Adjusting the volume, high/low-frequency sound and front speaker balance

– Registering the volume and tone control settings to a scene

■

The party mode allows you to play back in Zone2 the same music 
that is being played back in the main zone. During the party mode, 
stereo playback is automatically selected for all zones. Utilize this 
function when you want to use main zone music as background 
music for a house party.

Each time you press the key, the party mode is turned on or 
off.

When the party mode is turned on, “PARTY” lights up in the 
front display.

• If the party mode does not work on Zone2, set “Party Mode Set” (p.122) in 

the “Setup” menu to “Enable” (default).

• If “HDMI OUT2 Assign” (p.122) in the “Setup” menu is set to “Zone2”, Zone2 

output is available only when an HDMI input is selected in the main zone.