Yamaha RXA1040 Owner's Manual

Page of 160
PLAYBACK
➤ Configuring playback settings for different playback sources (Option menu)
En
97
Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments
• If you set an extreme value, sounds may not match those from other channels.
• You can also adjust the “Tone Control” setting with the front panel controls by pressing TONE/BALANCE 
repeatedly to select “Treble” or “Bass”, and PROGRAM to make an adjustment.
YPAO Volume (YPAO Volume)
Enables/disables YPAO Volume or Adaptive DRC.
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and 
low-frequency levels are automatically adjusted according to the volume so that 
you can enjoy natural sounds even at low volume.
Settings
• YPAO Volume works effectively after the measurement results of “Auto Setup” have been already 
saved (p.38).
• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower 
volumes or at night.
Sets whether the dynamic range (from maximum to minimum) is automatically 
adjusted when the volume level is adjusted. When it is set to “On”, it is useful for 
listening to playback at a low volume at night.
Settings
If “On” is selected, the dynamic range becomes narrow at a low volume and wide 
at a high volume.
FM Mode 
(FM Mode)
(Except for U.S.A. model)
Switches between stereo and monaural for FM radio 
reception.
Traffic Program 
(TrafficProgram)
(U.K. and Europe models only)
Automatically searches for a traffic information 
station.
Shuffle 
(Shuffle)
Configures the shuffle setting for the iPod (p.72), 
USB storage device (p.75), or media server (p.79).
Repeat 
(Repeat)
Configures the repeat setting for the iPod (p.72), 
USB storage device (p.75), or media server (p.79).
Item
Function
Page
YPAO Volume (YPAO Vol.)
Off (Off)
Disables YPAO Volume.
On (On)
Enables YPAO Volume.
Adaptive DRC (A.DRC)
Off (Off)
The dynamic range is not automatically adjusted.
On (On)
Automatically adjusts the dynamic range when YPAO Volume is 
enabled.
Volume: low
Volume: high
Input level
Input level
On
Off
On
Off
Out
put
 level
Out
put
 level