Yamaha RXA3040 Owner's Manual

CONFIGURATIONS

➤ Configuring the system settings (ADVANCED SETUP menu)

En

• Default settings are underlined.

Change the unit’s speaker impedance settings depending on the impedance of the 
speakers connected.

Turn on/off the remote control sensor on the main unit. While the remote control sensor 
is turned off, you cannot control the unit from the remote control.

Change the unit’s remote control ID so that it matches the remote control’s ID (default: 
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a 
unique remote control ID for its corresponding receiver.

ID1, ID2

■

To select ID1, hold down the cursor key (e) and SCENE (BD/DVD) together for 
3 seconds.
To select ID2, hold down the cursor key (e) and SCENE (TV) together for 
3 seconds.

SPEAKER IMP.

Changes the speaker impedance setting.

REMOTE SENSOR

Turns on/off of the remote control sensor on the main unit.

REMOTE CON AMP

Selects the unit’s remote control ID.

TUNER FRQ STEP

(Asia and General models only)
Changes the FM/AM tuning frequency setting.

TV FORMAT

Switches the video signal type.

MONITOR CHECK

Removes the limitation on HDMI video output.

RECOV./BACKUP

Creates backup of the settings of the unit, or recovers the settings 
from the backup.

INITIALIZE

Restores the default settings.

FIRM UPDATE

Updates the firmware.

VERSION

Checks the version of firmware currently installed on the unit.

6 

 MIN

Select this option when you connect 6-ohm speakers to the unit. You 
can also use 4-ohm speakers as the front speakers.

8 

 MIN

Select this option when you connect 8-ohm or higher speakers to the 
unit.

SPIMP.-

         8  M I N

 S P E A K E R  I M P .

ON

Turns on the remote control sensor.

OFF

Turns off the remote control sensor.

SPIMP.-

            O N

R E M O T E  S E N S O R

SPIMP.-

           I D 1

R E M O T E  C O N  A M P