Yamaha RXA3040 Owner's Manual
PREPARATIONS
➤ Optimizing the speaker settings automatically (YPAO)
En
47
The Yamaha Parametric room Acoustic Optimizer (YPAO) function
detects speaker connections, measures the distances from them to
your listening position(s), and then automatically optimizes the
speaker settings, such as volume balance and acoustic
parameters, to suit your room.
detects speaker connections, measures the distances from them to
your listening position(s), and then automatically optimizes the
speaker settings, such as volume balance and acoustic
parameters, to suit your room.
• The YPAO function of the unit adopts the YPAO-R.S.C. (Reflected Sound Control)
technology that enables to create natural sound fields like a room specifically
designed for acoustic perfection.
designed for acoustic perfection.
• Note the following regarding YPAO measurement.
– Test tones are output at high volume and may surprise or frighten small children.
– Test tone volume cannot be adjusted.
– Keep the room as quiet as possible.
– Stay in a corner of the room behind the listening position so that you do not
become an obstacle between speakers and the YPAO microphone.
– Do not connect headphones.
1
Press RECEIVER z to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit.
video from the unit.
3
Turn on the subwoofer and set the volume to half. If
the crossover frequency is adjustable, set it to
maximum.
the crossover frequency is adjustable, set it to
maximum.
4
According to your speaker configuration, configure
the “Power Amp Assign” setting (p.124) in the
“Setup” menu.
the “Power Amp Assign” setting (p.124) in the
“Setup” menu.
For the basic speaker configuration (p.19): set to “Basic”
(default).
(default).
For any of the advanced speaker configurations (p.24): set
to the appropriate setting.
to the appropriate setting.
5
Place the YPAO microphone at your listening
position and connect it to the YPAO MIC jack on the
front panel.
position and connect it to the YPAO MIC jack on the
front panel.
• Place the YPAO microphone at your listening position (same height as your
ears). We recommend the use of a tripod as a microphone stand. You can
use the tripod screws to stabilize the microphone.
use the tripod screws to stabilize the microphone.
9
Optimizing the speaker settings automatically (YPAO)
VOLUME
HIGH CUT
CROSSOVER/
MIN
MAX
MIN
MAX
9
YPAO MIC
9
1
2
3
4
5
E
R
The unit (front)
YPAO
microphone
microphone
Ear height
YPAO MIC
jack
RECEIVER
z
1 2 3 4 5 6 7 8 9 10