Aluratek ABGK04F Quick Setup Guide
Slim Color Folio Case with Bluetooth
Keyboard for Galaxy Tab 2 / Note 10.1
Charging the battery
The battery is not fully charged and it is highly recommended that you charge ABGK04F before you begin using it.
The battery is not fully charged and it is highly recommended that you charge ABGK04F before you begin using it.
Note: Using ABGK04F “out of the box” will not harm the device. You will experience reduced battery life as the unit will not be fully charged.
Connect the microUSB end of the USB cable provided to the keyboard and the other end of the USB cable to a
computer. Please charge the battery for a minimum of 4 hours. The red LED will be on while charging. When
charging is complete, the red LED will turn green.
computer. Please charge the battery for a minimum of 4 hours. The red LED will be on while charging. When
charging is complete, the red LED will turn green.
ON / OFF
SWITCH
PAIRING
Pairing ABGK04F with your Tablet
1. Make sure ABGK04F is turned ON by sliding the power switch to ON.
The blue LED will flash once.
1. Make sure ABGK04F is turned ON by sliding the power switch to ON.
The blue LED will flash once.
2. Activate ABGK04F pairing mode by pressing the button next to the
power switch. The blue LED will start to flash.
power switch. The blue LED will start to flash.
3. Activate your tablet’s Bluetooth function by going to > Settings >
Bluetooth > ON. Select “ABGK04F” when it is found.
Bluetooth > ON. Select “ABGK04F” when it is found.
4. Please enter the 4 digit PIN code shown on the tablet on the keyboard
and press “Enter”. The blue LED will turn OFF.
and press “Enter”. The blue LED will turn OFF.
5. The keyboard should be paired/connected and ready to use.