Alpine INE-W940 Owner's Manual
32
-EN
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
and the touch position on the touch panel do not match.
Setting item: Screen Alignment
1
Touch [Screen Alignment] in the Screen/LED
Customize screen.
Customize screen.
The adjustment screen appears.
2
Accurately touch the
mark provided in the
upper left corner of the screen.
3
Accurately touch the
mark provided in the lower
right corner of the screen.
This completes adjustment, and returns to the previous
screen.
screen.
• If you touch [
Cancel
] on the adjustment screen, no adjustment is
done and returns to the previous screen.
Initialize the corrected values adjusted by Adjusting the Touch Panel.
1
Touch [Screen Alignment Reset] in the Screen/
LED Customize screen.
LED Customize screen.
2
After the confirmation message appears, touch
[OK].
[OK].
The corrected values are initialized.
Visual Setting
[Visual] is selected on the General setup menu in step 3. Refer to
“General Setup Operation” (page 30).
“General Setup Operation” (page 30).
1
Touch the desired item.
• “Other” can be selected while a video is playing.
• If “Camera Select” is set to “Off,” this option is not available.
• If “Camera Select” is set to “Off,” this option is not available.
2
Touch [
] of the desired item.
Setting item: Other (Video Media) / Camera
Setting contents: Bright / Color / Contrast
Setting contents: Bright / Color / Contrast
3
Touch [
] or [
] to change its setting.
4
Touch [
] to return to the previous screen.
• Immediately after changing the settings of Display Setup (While the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.
OFF. Otherwise, the settings may not be changed.
Setting item: Bright
Setting content: -15 to +15 (Initial setting: 0)
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the brightness between MIN (-15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
Setting item: Color
Setting content: -15 to +15 (Initial setting: 0)
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the color between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
Setting item: Contrast
Setting content: -15 to +15 (Initial setting: 0)
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the contrast between LOW (-15) and HIGH (+15).
When it reaches the minimum or maximum point, the display
shows “LOW” or “HIGH” respectively.
When it reaches the minimum or maximum point, the display
shows “LOW” or “HIGH” respectively.
Adjusting the Touch Panel
Initializing the Touch Panel Corrected
Values
Values
Adjusting Brightness
Adjusting Color of Picture
Adjusting Image Contrast