Alpine INE-W940 Owner's Manual
45
-EN
After setting to “AUX3” in “Setting the AUX3 In Sel.,” this setting can
be carried out. The video input type can be changed.
be carried out. The video input type can be changed.
Setting item: AUX3 Signal
Setting contents: Auto (Initial setting) / NTSC / PAL
Setting contents: Auto (Initial setting) / NTSC / PAL
Setting the BLUETOOTH Pandora
®
(INE-
W940/INE-NAV-40 only)
[BLUETOOTH Pandora] is selected on the Source setup menu in
step3. Refer to “Source Setup Operation” (page 40).
To use BLUETOOTH Pandora, set the BLUETOOTH Pandora setting
to “On.”
step3. Refer to “Source Setup Operation” (page 40).
To use BLUETOOTH Pandora, set the BLUETOOTH Pandora setting
to “On.”
Setting item: BLUETOOTH Pandora
Setting contents: Off / On (Initial Setting)
Setting contents: Off / On (Initial Setting)
• When “On” is set, the BLUETOOTH Pandora
®
source is displayed
on the Top banner on the Audio/Visual screen.
BLUETOOTH Setup Operation
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch [
(BLUETOOTH)].
The BLUETOOTH Setup screen appears.
3
Select the desired item.
Setting items: BLUETOOTH / BLUETOOTH Info. / Set
BLUETOOTH Device / Auto Connect / Passcode
Change / Auto Answer / Auto Answer Time / Phone
Speaker / Ring Tone Volume / Microphone Level /
Caller Volume / Delete Call History
Change / Auto Answer / Auto Answer Time / Phone
Speaker / Ring Tone Volume / Microphone Level /
Caller Volume / Delete Call History
4
Touch [
] or [
] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
] to
close the window after setting.
5
Touch [
] to return to the previous screen.
• Immediately after changing the BLUETOOTH Setup (while the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.
OFF. Otherwise, the settings may not be changed.
Setting the AUX3 Sel. (Switching the Visual
Input Signal System)
Input Signal System)
Auto:
The video input signal type (NTSC or PAL) will
be automatically selected.
be automatically selected.
NTSC/PAL:
Choose the video input signal type manually.
BLUETOOTH Setup
To display the BLUETOOTH Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the BLUETOOTH mode operation has
been released. Engaging the parking brake can reactivate the
BLUETOOTH Setup Menu, as long as the car’s ignition has not
been turned off. It is not necessary to repeat the above procedure
(1 through 3) of “To display the BLUETOOTH mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the BLUETOOTH mode screen.”
been released. Engaging the parking brake can reactivate the
BLUETOOTH Setup Menu, as long as the car’s ignition has not
been turned off. It is not necessary to repeat the above procedure
(1 through 3) of “To display the BLUETOOTH mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the BLUETOOTH mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of BLUETOOTH Setup. Refer to each section for
details.
“Setting item” of BLUETOOTH Setup. Refer to each section for
details.