Alpine INE-W940 Owner's Manual
88
-EN
5
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*1) already
attached to the vehicle’s chassis. Connect all the
leads of the INE-W940/INE-NAV-40/INE-W940S
according to details described in the CONNECTION
section.
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*1) already
attached to the vehicle’s chassis. Connect all the
leads of the INE-W940/INE-NAV-40/INE-W940S
according to details described in the CONNECTION
section.
• For the screw marked “*2,” use an appropriate screw for the chosen
mounting location.
6
Slide the INE-W940/INE-NAV-40/INE-W940S into the
dashboard until it clicks. This ensures that the unit is
properly locked and will not accidentally come out
from the dashboard.
dashboard until it clicks. This ensures that the unit is
properly locked and will not accidentally come out
from the dashboard.
Removal
1. Insert the bracket keys into the unit, along the guides
on either side. The unit can now be removed from the
mounting sleeve.
mounting sleeve.
2. Pull the unit out, keeping it unlocked as you do so.
Hex Nut (M5)
Screw
Bolt Stud
This unit
Chassis
Ground Lead
Metal
Mounting
Strap
Mounting
Strap
*
2
*
1
This unit
Bracket keys
(Included)
(Included)