Yamaha RX-A2040 Owner's Manual

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

Automatically optimizes the speaker settings (YPAO).

Registers two speaker setting patterns and switches between them.

Copies the “Setting Pattern” parameters in the specified direction.

Selects a speaker system.

Selects the size of the front speakers.

Selects whether or not a center speaker is connected and its size.

Selects whether or not surround speakers are connected and their size.

Selects whether or not surround back speakers are connected and their size.

Selects whether or not front presence speakers are connected and their size.

Selects whether or not rear presence speakers are connected and their size.

Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or SUBWOOFER 2 jack and its phase.

Selects the layouts of the surround speakers, front/rear presence speakers and subwoofers.

Sets the distance between each speaker and listening position.

Adjusts the volume of each speaker.

Adjusts the tone with an equalizer.

Enables/disables the test tone output.

Enables/disables the Lipsync adjustment for each input source.

Selects the method to adjust the delay between video and audio output.

Adjusts the delay between video and audio output manually.

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.

Sets the maximum volume to prevent excessive loudness.

Sets the initial volume for when this receiver is turned on.

Selects whether to output video signals during the Pure Direct mode.

Selects whether to automatically adjust the CINEMA DSP effect level. 

Enables/disables CINEMA DSP 3D.

Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used.

Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers.