Yamaha RX-A2040 Owner's Manual

PLAYBACK

➤ Basic playback procedure

En

Refer to the instruction manual for the external device.

For details on the following operations, see the 
corresponding pages.

• Listening to FM/AM radio (p.76)

• Playing back iPod music (p.83)

• Playing back music stored on a USB storage device 

• Playing back music stored on media servers (PCs/NAS) 

• Listening to Internet radio (p.92)

• Playing back music with AirPlay (p.95)

• To mute the audio output, press MUTE. Press MUTE again to unmute.

• To adjust the treble/bass settings, use the “Option” menu or 

TONE/BALANCE on the front panel (p.108).

 On-screen input selection

a Press ON SCREEN.
b Use the cursor keys to select “Input” and press ENTER.
c Use the cursor keys to select the desired input source and 

press ENTER.

Each time you press the key, the HDMI OUT jack to be 
used for signal output changes.

• You can also select an HDMI output jack by selecting a scene (p.68).

• When “OUT 1+2” is selected, the unit outputs video signals at the highest 

resolution supported by both TVs (or projectors) connected to the unit. (For 
example, if you have connected a 1080p TV to the HDMI OUT 1 jack and a 720p 
TV to the HDMI OUT 2 jack, the unit outputs 720p video signals.)

• If the HDMI OUT 2 jack is assigned to Zone2 or Zone4 (p.138), you can turn on/off 

each zone by pressing HDMI OUT repeatedly.

Outputs the same signal at both the HDMI OUT 1 
and HDMI OUT 2 jacks.

Output the signals at the selected HDMI OUT jack.

Does not output the signals at the HDMI OUT jacks.

   O U T  1 + 2

H D M I  O U T  S e l .