Samsung RF263BEAESG/AA Owner's Manual

Page of 92
operating
 
_17
( 8 ) Filter
Water filter usage
This icon will light up when you need to 
change the filter. After you use about 
300 gallons of water, the filter indicator 
lights up. (about 6 months). 
After you install the new water filter, reset
the filter indicator by touching the Ice Type/
Water Hold 3 sec for Filter Reset button. 
If water is not dispensing or 
 
dispensing slowly, you need to 
replace the water filter because 
the water filter is clogged.
Some areas have large amounts 
 
of lime in their water, which 
causes the water filter to clog 
more quickly.
Cooling Off 
Mode
mode), is designed for use by retailers 
when they are displaying refrigerators on 
refrigerator’s fan motor and lights work 
normally, but the compressor does not 
run, and the refrigerator and freezer do 
touch and hold the Energy Saver button 
and the Freezer button for 5 seconds 
during normal operation. The refrigerator 
chime sounds and the temperature 
display flashes OF OF.
hold the Energy Saver and the Freezer 
buttons again for 5 seconds.
CHANGING THE WATER FILTER
To reduce risk of water damage to your 
property DO NOT use generic brands of 
water filters in your SAMSUNG Refrigerator. 
USE ONLY SAMSUNG BRAND WATER FILTERS. 
SAMSUNG will not be legally responsible for any 
damage, including, but not limited to property 
damage caused by water leakage from the use of 
a generic water filter. SAMSUNG Refrigerators are 
designed to work ONLY WITH SAMSUNG Water 
Filter.
The Filter light turns red to let you 
know when it is time to change your 
water filter cartridge.
To give you time to get a new filter, 
the red light comes on just before the 
capacity of the current filter runs out. 
Changing the filter on time provides you with the 
freshest, cleanest water from your refrigerator.
1. 
filter ( 
1 ) about 1/4 turn, counter-clockwise.
 Pull the water filter ( 
2. 
1 ) from the case filter ( 2 ).
To change the water filter more easily, 
 
 Sometimes, it is hard to disassemble the water 
 
filter because impurities in the water cause it 
to stick. If you are having difficulties, grip the 
water filter firmly and pull it hard.
 When you pull the 
 
water filter, a little 
water can leak from 
the opening. This is 
normal. To minimize 
the water leaks, keep 
the filter cartridge horizontal when you pull it.
       
 
3 ) and dry around the filter case ( 2 ).
 Insert the new filter into the filter case ( 
4
3.
 ).
Push the filter, and then turn it clockwise until it 
4. 
locks.
 If you have trouble inserting the water 
 
filter because of high water pressure, 
The locked symbol should be lined up 
 
with the indicator line.
Touch the 
5. 
“Ice Type/Water 
Hold 3 sec for Filter Reset
 
button (
(Filter Reset)
) for 
about 3 seconds to reset 
the water filter. The color of 
of the indicator (       ) changes from red to light off.   
6. 
on.
For a replacement water filter, you can 
visit your local home Improvement center 
or contact the Samsung Parts distributor. 
Be sure the replacement water filter has 
the SAMSUNG logo on the box and 
on the water filter. Link : http://www.
samsungparts.com
WARNING
(Red)
3
2
4
2
1
DA68-02601A(EN+FR+ES)-0.2.indb   13
2012.3.31   9:49:46 AM
02 
OPERA
TING
The icon will blink red for several seconds 
when you open or close the door.
To prevent ooverflow, empty the water filter tray