Samsung RF263BEAESG/AA Owner's Manual

18_

 

operating

Removing any residual matter inside 
the water supply line after installing 
the water filter.

Turn ON the main water 

1. 

supply and supply water 
to the refrigerator.
Select water in the button

2. 

“ICE TYPE/WATER”,pour 

1 Gal (6-7 minutes) to clean the water supplier
system and it will take the air out from the lines.

possible an additional flushing in the household
lines.

If after pour 1 Gal the water doesn’t turn clear is 

3. 

Open the Refrigerator door and make sure 

4. 

there are no water leaks coming from the 
water filter.

Be sure to flush the dispenser system thoroughly, 
otherwise water may drip from the dispenser.
This means that there is still air in the line.

Reverse Osmosis Water Supply 
IMPORTANT:

The pressure of the water supply coming out of a 
reverse osmosis system going to the water inlet 
valve of the refrigerator needs to be between 35 
and 120 psi (241 and 827 kPa).
If a reverse osmosis water filtration system is 
connected to your cold water supply, the water 
pressure to the reverse osmosis system needs to 
be a minimum of 40 to 60 psi (276 to 414 kPa.) If 
the water pressure to the reverse osmosis system 
is less than 40 to 60 psi (276 to 414 kPa):

Check to see whether the sediment filter in the 

t  

reverse osmosis system is blocked. Replace 
the filter if necessary.
 Allow the storage tank on the reverse osmosis 

t  

system to refill after heavy usage.
 If your refrigerator has a water filter, it may 

t  

further reduce the water pressure when used 
in conjunction with a reverse osmosis system. 
Remove the water filter.

If you have questions about your water pressure, 
call a licensed, qualified plumber.

CONTROLLING THE TEMPERATURE

Basic temperature of Freezer and 
Refrigerator Compartments

The basic temperature and recommended 
temperatures of the Freezer and Refrigerator 
Compartments are  0°F and 37°F(or -18°C and 
3°C) respectively. If the temperature of the Freezer 
and Refrigerator Compartments are too high or 
low, adjust the temperature manually.

Controlling the Freezer 
temperature

The Freezer temperature can be set between -8°F 
and 5°F (or between -23°C and -15°C) to suit 
your particular needs. Press the Freezer button 
repeatedly until the desired temperature is shown 
in the temperature display. The temperature will 
change by 1°F (or 1°C) with each press. See 
below.
Fahrenheit : 0°F

 - 1°F  

 -2°F  

 -3°F  

 -4°F  

 

-5°F  

 -6°F   

-7 °F   

 -8°F  

 5°F  

 4°F  

 3°F  

 2°F  

 1°F  

 0°F.

Centigrade : -18°C  

 -19°C  

 -20°C  

 -21°C  

 -22°C  

 -23°C   

- 15°C  

 -16°C  

 -17°C  

 

-18°C.
Keep in mind that foods like ice cream may melt 
at 4°F (or -15.5°C). The temperature display will 
move sequentially from -8°F to 5°F (or from -23°C 
to -15°C).

Controlling the fridge temperature

The fridge temperature can be set between 
34°F and 44°F (or between 1°C and 7°C) to suit 
your particular needs. Press the Fridge button 
repeatedly until the desired temperature is shown 
in the temperature display. The temperature will 
change by 1°F (or 1°C) with each press. See 
below.
Fahrenheit : 37°F  

 36°F  

 35°F  

 34°F  

 44°F   

 43°F  

 42°F  

 41°F  

 40°F  

 39°F  

 38°F  

 37°F.

Centigrade : 3°C  

 2°C  

 1°C  

 7°C  

 6°C  

 

5°C  

 4°C  

 3°C.

The temperature control process for the Fridge 
works just like the Freezer process. Press the 

Recommend Temp (Freezer) : 0°F (or -18°C )

DA68-02601A(EN+FR+ES)-0.2.indb   14

2012.3.31   9:49:47 AM