Samsung RF263BEAESG/AA Owner's Manual

20_

operating

remove all ice cube tray. If not using the ice

dispenser, it is possible to stack the cubes.

Remove the tank in the direction of the arrow.

Dispose of ice cubes or ice mass. Push the bottom

of the tray until it clicks.

and try again.

Use only the ice maker refrigerator. Only a suitably

supply to the refrigerator. Connect only to a

potable water supply.

In order that the ice maker work properly, need a

water pressure of 20 ~ 125 psi (138 ~ 862 kPa).

Whether traveling for vacation or business and

will not use water dispensers and ice for an

extended period:

Close the stopcock. If not, can result in water

leakage.

Remove all food.

Unplug the refrigerator.

Remove excess moisture from inside the

refrigerator and leave doors open. Otherwise,

hands or any other inappropriate object in the

container or bucket of ice maker.

It may cause personal injury or property damage.

Can cause injury.

Never try to take the ice maker.

Do not wipe or spray the ice tray with water while

in the refrigerator. Remove for cleaning.

When inserting the tray of the ice maker,

make sure it is well centrada.De Otherwise,

you could lock.

The phenomenon of turbidity

The water entering the cooler circulates through

oxygen and nitrogen. When it is contacted with air,

the pressure drops rapidly and the oxygen and

nitrogen is oversaturated and generate gas bubbles.

Temporarily, water can have a cloudy appearance

due to these bubbles of oxygen. After a few seconds,

water is colorless.

To remove the ice cubes without use the

(Remove the front cover of the Ice Maker)

Ice cubes in the ice machine may leak on

the drawer.

Not put food into the tray of ice.de hielo.

If you store food in the ice bucket,may hinder the

ice maker to open or close the door, and damage

the ice maker.

Note that the ice cubes from the ice bucket

can spill over the box to remove the tray from

the drawer. In this case, you must remove the

drawer the ice cubes that have been spilled.

In case of power outage, ice cubes can melt

and then freeze when power returns, causing

the dispenser to stop working.

To prevent this from happening after a power outage,

remove the ice bucket and discard the ice and

wastewater.

If you use all the ice at one time, repeat

Steps 2 and 3 on the previous page.

may have bad taste.

However, wait only 8 hours before removing the

cubes and ensure their maximum output.

How to Use Ice Off function

WARNNIG

DA68-02601A(EN+FR+ES)-0.2.indb 16

2012.3.31 9:50:26 AM

WARNNIG

check the

water level

Test button